GLEASON 14 UNIVERSAL ANGULAR BEVEL TESTING MACHINE
Condition:used
Maximum diameter gear (nominal):20″ (508MM)
Range of shaft angles:0 TO 180 DEGREES
Above center:4.5″ (114.3MM)
Below center:4.5″ (114.3MM)
To machine centerline:(-127MM/+330.2MM)
Gears)- away from operator:9″ (228.6MM)
Bore diameters (large end):3-29/32″ (99.218MM)
Bore taper(s), per ft.:39/64″ (15.478MM)
Depth(s) of taper:6″ (152.4MM)
Thru-bore diameter(s):1.468″ (37.306MM)
Spindle(s), 8 speeds:400 TO 1500 RPM
Main drive motor hp at 1800 rpm:7.5 HP
Main drive motor hp at 1200 rpm:5 HP
Main drive motor hp at 900 rpm:3.75 HP
Main drive motor hp at 600 rpm:2.5 HP
Approx machine overall dimensions:(1651X1905X1651MM)
Approx machine net weight:4,550 LBS (2,068 KG)
MODEL 14
SUITABLE FOR THE RUNNING TESTING/CHECKING FOR
SMOOTHNESS AND QUIETNESS OF OPERATION AND
INSPECTION OF ACTUAL TOOTH CONTACT, UNDER LOAD,
(TOOTH BEARING), ON A WIDE VARIETY OF
STRAIGHT AND CURVED TOOTH BEVEL GEARS OF ANY
SHAFT ANGLE, INCLUDING HYPOID, SPUR, HELICAL,
INTERNAL GEARS, AS WELL AS WORM AND WORM-WHEEL
COMBINATIONS UP TO 20″ (508MM) DIAMETER.
EQUIPMENT / FEATURES:
4 SPEED MAIN DRIVE MOTOR W/DRUM SWITCH SPEED SELECTOR
2-STEP DRIVE PULLEY
FORWARD/REVERSE DIRECTION SPINDLE ROTATION
VIA PUSH BUTTON
DOUBLE COMPOUND ADJUSTABLE GEAR-SPINDLE SLIDE
OVER-ARM BRACKET
(LESS OVER-ARM & OUTER ARBOR BEARING SUPPORT)
FULL COMPLEMENT OF ELECTRICS (MOTORS/CONTROLS)
HAND-WHEELS, GUARDS, COVERS
