GILDEMEISTER MF TWIN 65 Y – Year 1999
Technical specifications of the GILDEMEISTER MF TWIN 65 Y lathe
General data
swing over bed: 240 mm
maximum workpiece diameter: 200 mm
feed rates in the X/Y/Z axis: 190/40/555 mm
rapid traverse in the X/Y/Z axis: 20/7.5/30 m/min
X/Y/Z axis resolution: 0.001 mm
feed force in the X/Y/Z axis: 400/700/700 daN
bed inclination angle: 45°
distance between spindles: 800 mm
guideway type: roller guideways
power supply: 3x 400 V; 50 Hz
Main spindle
rotational speed range: 25-5000 rpm
rated rotational speed: 850 rpm
maximum bar diameter: 65 mm
spindle bore: 79 mm
spindle end: 170 h5 mm
clamping chuck maximum diameter: 200 mm
face bearing diameter: 120 mm
power (40/100% ED): 28/21 kW
maximum torque (40/100% ED): 320/240 Nm
C axis
rapid traverse in the C axis: 250 rpm
C axis torque: 200 Nm
C axis resolution: 0,025°
Sub-spindle
rotational speed range: 31-6300 rpm
rated rotational speed: 1000 rpm
maximum bar diameter: 42 mm
spindle bore: 56 mm
spindle end: 140 h5 mm
clamping chuck maximum diameter: 200 mm
face bearing diameter: 90 mm
power (40/100% ED): 18/14 kW
maximum torque (40/100% ED): 130/173 Nm
C axis
rapid traverse in the C axis: 250 rpm
C axis torque: 120 Nm
C axis resolution: 0,025°
Tool heads
capacity (upper head / lower head): 12/12
rotational speed range: 40-4200 rpm
DIN 69880 toolholder diameter: 30 mm
power (40/100% ED): 7/5 kW
maximum torque (40/100% ED): 22/15 Nm
Hydraulic unit
oil tank capacity: approx. 25 l
pump power: 1.1 kW
maximum operating pressure: 80 bar
Cooling unit
coolant tank capacity: 200 l
pump power: 1.65 kW
flow rate at 6 bar: 50 l/min
Dimensions and weight
length with chip conveyor: 4770 mm
width with control cabinet: 2220 mm
height with control cabinet: 1950 mm
weight of machine: approx. 6500 kg
Equipment of the MF TWIN 65Y CNC lathe
CNC controller: SIEMENS SINUMERIK 840 C
bar feeder: IRCO SiMag
upper tool head with Y axis
lower tool head
sub-spindle
3-jaw hydraulic chuck: BISON (2 pcs)
hydraulic sleeve chuck: HAINBUCH (2 pcs)
driven tools
sleeves for sleeve chuck with diameter:
– 6, 18, 28, 29, 30, 34, 45, 50, 52, 58 mm (1 pc.)
– 8, 10, 12, 15, 16, 25, 35, 40, 55, 60 mm (2 pcs.)
gripper for picking up the finished workpiece
straight toolholders (3 pcs)
90° driven angle toolholders (2 pcs)
knives toolholders (9 pcs)
drill/boring toolholders (5 pcs)
workpiece conveyor
chip conveyor
coolant filtration system: KNOLL
GILDEMEISTER MF TWIN 65 Y CNC lathe built in 1999 in Germany allows for fully automated production processes while maintaining high accuracy and low operating costs. The machine distinguished by its extensive machining capabilities, thanks to its sturdy design, extensive equipment and focus on high productivity, is ideal for any production facility, even during the most demanding challenges.
The MF TWIN 65Y CNC turning centre performs precision machining of metal workpieces with a maximum diameter of 200 mm, using reliable tools located in two 12-position tool heads (upper and lower). Workpiece turning takes place inside a large work area equipped with a rigid bed inclined by 45° and an integrated chip conveyor designed to keep the work area clean by constantly removing the chips into a special container located next to the machine. The GILDEMEISTER MF TWIN 65 CNC dual-spindle lathe is also equipped with, among others, a workpiece conveyor, IRCO SiMag bar feeder, Y axis and additional tooling. The total weight of the machine is approximately 6500 kg.
