FORVET FRANCESCA FC 16M 1250 H.Q. Glass Drilling Machine – Year 2023
Y axis – max 1250 mm
Minimum glass dimension – 150x350mm
Maximum Glass thickness -3 to 19 mm
Maximum drilling diameter – 70 mm
Number of spindles – 16

Manufacturer Catalogue Information about FORVET FRANCESCA FC 16M 1250 H.Q. Glass Drilling Machine :
The FRANCESCA FC 1250 H.O. is a glass working Numerically Controlled (NC) drilling centre, capable of performing drilling, countersinking and milling operations on flat glass sheets, ranging in thickness from 3 to 25mm. including “out of square” pieces.

The working field is as wide as 1250 mm. and length limits are according to the conveyor.

The working cycle is completely automatic, so it does not require any manual intervention.

The NC optimises the approaching speed of the heads, controls the glass transport feed, drilling speed and water quantity and adjusts the drill height to compensate for its wear.

The operator is only required to set the hole diameter and its coordinates.

Forvet can provide also customized solution on FC 1250 H.O (not included in the standard machine version), processing glass width that exceeds the machine size. This means that glass up to 1500 mm width can be loaded and operated with the minimum effort, keeping the maximum working stroke to 1250 mm maximum.

Technical specification
X axis : free (according to the conveyor size)
Y axis : max 1250 mm
Minimum glass dimension : 150x350mm (drilling) | 150x450mm (milling)
Maximum Glass thickness : from 3 to 19 mm (25 mm optional)
Maximum drilling diameter : 70 mm
Number of spindles : 16 (8+8)