FMB Turbo 8-80
12 Inch Magazine Type Bar Feed

For Fixed Headstock
New 2007

Bar Diameter Capacity:
w/out prep: .315″ – 3.071″ (8mm – 78mm)
with prep: ..315 – 3.149″ (8mm – 80mm)
Max. bar length: 4200 mm (13′ 8″)
Min. bar length: 1000 mm (39.4″)
Max. remnant length: 530 mm (20.8″
Magazine rack capacity: 11″
Bar loading cycle time: 30 seconds for 12′ bar
Material straightness specification: .007″ TIR/ft. of material
(V blocks, 3 points equidistant)
Feed force (pusher torque): max 750 N, adjustable
Forward feed rate: 2360 IPM, adjustable
Return feed rate: 0 – 1650 IPM, adjustable
Power consumption: 1.5 kw
Operating voltage: 230V/60Hz 3-phase
Control voltage: 24V DC
Oil capacity: 80 liters (22 gallons)
Oil viscosity: ISO 150 cST
Compressed air supply: 6 bar (90 psi)
Compressed air consumption: approx. 10 liters per loading cycle

Manufacturer Catalogue Information about FMB Maschinenbau TURBO 8-80
Magazine for bar diameters of 8–80 mm :

The FMB turbo 8-80 is a magazine for bar diameters from 5–65 mm which, like the other model variants, works on the principle of two-stage feed that characterises the turbo series. The swivelling pusher means that a very compact, space-saving construction can be achieved. The solid machine bed of grey cast iron also ensures the necessary stability, especially for the precise machining of larger material bar Diameters.

Area of application:
Single-spindle lathes with up to 80 mm nominal throughput gap, intended for the permanent processing of medium-sized to large diameter ranges or the occasional processing of small bar diameters.