FEHLMANN Piccomax 51 TNC – 2011 Model
CNC Milling Machine

very good condition – little used!!!
Control Heidenhain TNC 124
Accessories available.
incl. Heidenhain edge finder KT 130
with tool carousel

working range
traverse path longitudinal X-axis 450 mm
traverse path cross Y-axis 260 mm
quill stroke Z-axis 120 mm
traverse path machine head W-axis 450 mm

Feed rates rapid traverse

Speeds:
X- and Y-axis 1-2000 mm/min
Z-axis: feed gear with 6 steps 0.02 – 0.030 rpm
W-axis 1800 mm/min

Feed forces:
X- and Y-axis 4000 N
Z-axis 5000 N

Rapid traverse:
X and Y axis 2000 mm/min
Displacement measuring system Resolution:
Direct measuring system via linear scale X / Y axis
Indirect measuring system via rotary encoder axis Z
Adjustable cams W axis
Resolution in X, Y and Z axis 0.001 mm
Table
Clamping surface (lxw) 770 x 320 mm
Working area
T-slots:
Number 5
width 12-H8 mm
Distance 50 mm
Permissible table load 200 kg
Table height from floor 1080 mm
Distance table-spindle nose (min-max) 0 – 110 – 560 mm
Horizontal projection 270 mm

Clamping capacity
Drilling capacity ø 20 mm
Milling capacity 30 cm³/min
Thread cutting 16 M
Working spindle
Quick tool change system SF 32
Tool change mechanically via drill lever
Repeat accuracy 0,002 mm
Change time approx. 3 sec
Speed range (infinitely variable) 100 – 9200 rpm
Drive power 9,9 kW
Max. torque Torque 35 Nm

Coolant device
Pump flow rate 30 l/min
Central lubrication
Elect. Connections
Operating voltage 3 x 380 / 50 V / Hz
Total connected load 10 kVA
Mains fuse 25 (inert)