← Back to Machine List

Fanuc Robodrill A-T14 – Year 1999

Fanuc a-T14iA CNC Drill and Tapping Center
w/ Nikken 5-Axis Trunnion

Mfg: 1999

Specifications:

Table Size:

25.59″ x 14.96″

Maximum Table Load:

440 Lbs

Spindle Nose to Table Top:

5.9″ – 17.71″

X-Axis Travel:

19.6″

Y-Axis Travel:

14.96″

Z-Axis Travel:

11.81″

Rapid Traverse Rate X,Y & Z:

1889 Ipm

Cutting Feed Rate:

0.1 – 787 Ipm

Spindle Speeds:

80 – 8000 Rpm

Spindle Motor:

7.5 Hp

Spindle Taper:

BT 30

Tool Changer Capacity:

14 Station ATC

Weight (Approx.):

6,000 Lbs

Dimensions (Approx.):

132″ x 62″ x 88″

Equipped With:
Fanuc 16i-M CNC Control
Nikken 5AX-2MT-105-120 Daul Platten 5 Axis Trunnion

14- Position Turret

Rigid Tapping

Barnes Series 30 Kleenall Chip Conveyor & Filter

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

How Smart Engineers Assess a Pre-Owned, Used, Second-Hand, Surplus CNC-Takang VMC 1700S – Year 2011 made in Taiwan Before Purchase Used Machines For Sale
13/01/2026 • 4 min read

How Smart Engineers Assess a Pre-Owned, Used, Second-Hand, Surplus CNC-Takang VMC 1700S – Year 2011 made in Taiwan Before Purchase

Below is a professional, detailed guide for engineers and buyers on how to evaluate a pre-owned, used, second-hand, surplus CNC-Takang…

Read Guest Post →
From Inspection to Installation: What to Verify Before Buying a Pre-Owned, Used, Secondhand, Surplus Amada Miyachi Jupiter 68P0070 Laser Welding System made in Japan Used Machines For Sale
12/01/2026 • 4 min read

From Inspection to Installation: What to Verify Before Buying a Pre-Owned, Used, Secondhand, Surplus Amada Miyachi Jupiter 68P0070 Laser Welding System made in Japan

Below is a professional, clear, and purely textual English evaluation guide you can use before purchasing a pre-owned / used…

Read Guest Post →
From Factory Floor to Your Workshop: Evaluating a Pre-Owned, Used, Secondhand, Surplus CNC Machine Before Purchase GWEIKE TECH LF-4020GAR Profile and pipe laser cutting machine made in China Used Machines For Sale
11/01/2026 • 4 min read

From Factory Floor to Your Workshop: Evaluating a Pre-Owned, Used, Secondhand, Surplus CNC Machine Before Purchase GWEIKE TECH LF-4020GAR Profile and pipe laser cutting machine made in China

This includes technical details, inspection checkpoints, and what to verify before buying — focused on practical machine assessment and workshop…

Read Guest Post →