EVERRICHO ER VMC 1680 LB – Year 2015
CNC Vertical Machining Center

Technical parameters of the EVERRICHO ER VMC 1680 LB CNC milling machine

– CNC control: FANUC Oi-MD
– machine time worked: approx. 3300 h
– table dimensions: 1600 x 700 mm
– X, Y, Z axis travels: 1600 x 800 x (300-1100) mm
– maximum workpiece weight: 2000 kg
– diameter of the rotary table (4th and 5th axis): 320 mm
– belt drive spindle: 6000 rpm.
– sliding guides
– tool magazine: 24 positions
– cooling through the spindle: 20 bar
– total weight of the machine: 13500 kg

Standard equipment of the EVERRICHO ER VMC 1680 LB machining center

– reciprocating compressor
– measuring rulers, increasing the accuracy of the machine
– spindle oil cooling unit and ball screws

Accessories for the EVERRICHO ER VMC 1680 LB machining center

– tool measurement probe: RENISHAW TS27R
– workpiece measurement probe, with optical transmission: RENISHAW OMP60

The EVERRICHO ER VMC 1680 LB vertical machining center was built in 2015, it is offered together with a reciprocating compressor. The new CNC center EVERRICHO ER VMC 1680 costs net: PLN 694,000 (without the compressor). The milling center ER VMC 1680 LB was launched in December 2015 and worked very little until January 2019. Before each start-up, the milling machine was warmed up at slow feeds and low revs for about 40 minutes (warm-up time without load: approx. 800 h). The total working time of the machine: approx. 3,300 h, including the processing: 2,500 h. It is a very precise and rigid CNC milling machine (13 tons). After installing the tilting rotary table, it works in 5 axes. Only prototypes were made on the machine, it was not used for mass production.