The EUROMETAL LV2500A / 1 carousel lathe was manufactured by Eurometal Sp. zoo. in 2014, the carousel machine processes a workpiece with a maximum turning diameter of 2500 mm, a weight of up to 20 t and a height of up to 1600 mm. The cross-section of the tool shank measures 40×50 mm. The working table has 16 gears, and its rotation speed ranges from 2.5 to 80 revolutions per minute. The maximum cutting force for the right bottom bracket is 35 kN, for the left bottom bracket is 28 kN, and the total maximum cutting force is 53 kN in total. The total weight of the machine is 33 tons.

Technical data of the EUROMETAL LV2500A / 1 turret lathe

– maximum turning diameter: 2500 mm
– maximum height of the detail: 1600 mm
– maximum workpiece weight: 20 tons
– maximum cutting force of the right support: 35 kN
– maximum cutting force of the left support: 28 kN
– maximum total cutting force: 53 kN
– maximum torque: 63 kNm
– number of gear ratios of the working table: 16
– working table rotational speed range: 2.5 – 80 rpm
– feed range of the right / left slide: 0.2-145 mm / min (18 gears)
– cross beam travel: 1250 mm
– vertical travel of supports: 1400 mm
– horizontal travel of slides: 1400 mm
– accelerated feed of slides: 1550 mm / min
– maximum slides inclination angle: +/- 30 degrees
– maximum diameter of the side head processing: 2300 mm
– vertical travel of the side head: 1200 mm
– horizontal travel of the side head: 700 mm
– tool shaft cross-section: 40×50 mm
– main engine power: 55 kW
– overall dimensions (length x width x height): 5180 x 5200 x 4870 mm
– machine weight: 33,000 kg