Equiptop Hitech ETM-510 – Year 2007
SPECIFICATIONS：
| Equiptop | Hitech | UNIT | ETM-510 | ETM-510APC |
| Travel | Max. Travel Fox X Axis | mm | 510 | 510 |
| Max. Travel Fox Y Axis | mm | 400 | 360 | |
| Max. Travel Fox Z Axis | mm | 450 | 450 | |
| Spindle Nose To Table | mm | 200-650 | 160-610 | |
| Spindle | Spindle Speed | rpm | 8000; 10000(Optional)/12000(Optional)/15000(Optional) | |
| ATC System | Tool Q’ty | 只 | Arm Type 20T | Arm Type 20T |
| Max. Tool Diameter | mm | 65 | 65 | |
| Max. Tool Length | mm | 200 | 200 | |
| Max. Tool Weight | kg | 3 | 3 | |
| Tool Shank | BT30 | BT30 | ||
| Motor | Mitsubishi/Fanuc | kw(HP) | 3.7 7.5 |
3.7, 5.5(Optional) 7.5 |
| Mitsubishi/Fanuc | kw | 1.0/1.0/3.0 1.6/1.6/3.0 |
1.0/1.0/3.0 1.6/1.6/3.0 |
|
| Table | Table Size | mm | 600×360 | (560×400)x2 |
| Max. Table Capacity | kg | 250 | 200×2 | |
| T-slot(Center x Width x No.) | mm | 100x18x3 | 100x14x5 | |
| Feed Rate | X Rapid Travel | M/mm | 48 Linear | 48 Linear |
| Y Rapid Travel | M/mm | 48 Linear | 48 Linear | |
| Z Rapid Travel | M/mm | 48 Linear | 48 Linear | |
| Cutting Feed Rate | mm/min | 1-1000 | 1-1000 | |
| Controller | Mitsubishi or Fanuc | M70/M80 or Oi-MF | M70/M80 or Oi-MF | |
| Other | Machine Weight | kg | 2800 | 4300 |
| Power Requirement | KVA | 10 | 15 | |
| Air Requirement | kg/cm2 | 6 | 6 | |
| Coolant Water | L | 200 | 130 | |
