| Engis LPM-6000 Single-Pass Vertical Honing/Bore Finishing Machine – Year 2013 | |
|---|---|
| Machine | Engis LPM-6000 Single-Pass Honing / Bore Finishing Machine |
| Year | 2013 (New) |
| Serial Number | 2012339 |
| CAPACITY | |
| Bore Diameter Range | Up to 152 mm (6 in) |
| Parts per Cycle | 2 Parts |
| TRAVEL | |
| Head Travel (Z-Axis, Servo Feed) | 635 mm (25 in) |
| Spindle Nose to Table (Max) | 737 mm (29 in) |
| INDEXING TABLE | |
| Number of Stations | 10 |
| Table Diameter | 864 mm (34 in) |
| SPINDLES | |
| Number of Spindles | 6 |
| Spindle Speed | 100 – 1,500 RPM (Infinitely Variable) |
| Spindle Motor | 5.6 kW (7.5 HP) |
| Spindle Size | 34.9 mm (1-3/8 in) ASA |
| Feed Rate (Max) | 8,890 mm/min (350 in/min) |
| ELECTRICAL | |
| Power Requirement | 380 – 480 VAC, 3 Phase, 50/60 Hz, 30 FLA |
| DIMENSIONS & WEIGHT | |
| Machine Dimensions (L x W x H) | 1473 x 2159 x 2794 mm (58 x 85 x 110 in) |
| Coolant Tank Dimensions | 1372 x 610 x 610 mm (54 x 24 x 24 in) |
| Canister Filter Dimensions | 508 x 381 x 1321 mm (20 x 15 x 52 in) |
| Weight | 2,517 kg (5,550 lb) |
| EQUIPPED WITH | |
| Mitsubishi GOT1000 Control Interface Chamfer Station Pneumatic Activated Clamping Manifold Coolant Tank Canister Filter for Coolant |
|
