EMMEGI PHANTOMATIC T3 STAR – Year 2014
CNC 4-AXIS VERTICAL PROFILE Machining CENTER

PHANTOMATIC T3 STAR / CNC MACHINING CENTRES
AXIS STROKES
X AXIS (longitudinal) (mm)
4.300
Y AXIS (transversal) (mm) 270
Z AXIS (vertical) (mm) 300
A AXIS (workpiece automatic rotation) -90° ÷ +90°
ELECTROSPINDLE
Maximum power in S1 (kW)
5,5
Maximum power in S1 (kW) (optional) 7,5
Maximum speed (rpm) 20.000
Toolholder cone HSK – 63F
AUTOMATIC TOOL MAGAZINE
Maximum diameter of the blade that can be inserted in the magazine (mm)
Ø = 180
Number of angle machining heads that can be inserted in the magazine 2
Maximum number of magazine tools 4 standard ; 8 optional

FUNCTIONS
Basic multi-step machining – up to 5 steps
Automatic management of multi-step mode machining
Extended machining, up to twice the maximum nominal length in X (only with two reference stops)
Multi-piece mode machining in Y
Workpiece rotation for machining on 4 sides
Multi-piece operation (only with two reference stops)

WORKABLE SIDES
With angle machining head (side faces and heads)
2 + 2
With blade tool (upper face, side faces and heads) 1 + 2 + 2
With direct tool (upper face and side faces) 3
TAPPING CAPACITY (with Tap On Aluminium And Through Hole)
With compensator
M8
Stiff (optional, only with 7.5 kW electrospindle) M10
PROFILE POSITIONING
Workpiece reference LEFT stop with pneumatic movement
Workpiece reference RIGHT stop with pneumatic movement

Equipped With
Pneumatic stops
Robust stops are present in the machine that and used for bar reference, located one on the right side and one on the left side. Each stop is activated by a pneumatic cylinder, it is of retractable type and is automatically selected by the machine software according to the machining to be performed. In short, double stop offers the advantage to load more profile pieces for multi-piece mode machining as well as the possibility to reposition the bar or the piece and perform machining on particularly long profiles.

Electrospindle – T –
The high-torque 5.5 kW electrospindle in S1, which is available on request with 7.5 kW power in S1, enables even heavy machining typical of the industrial sector. It can be used for some types of steel extrusions as well as for aluminium profiles, thanks to the software-adjusted lubricating system. With its double tank it allows either minimum oil circulation or oil emulsion spray-mist.

Tool magazine
The new toolholder magazine, which is circular in shape, makes it possible to reduce the footprint, to ensure the positioning of large extrusions on the machine and also to perform tool changes very quickly. The sheet metal protective cover offers optimum protection for the toolholder cones from swarf and accidental knocks. The magazine can contain up to 4 toolholders (8 upon request) with relevant tools, which can be set at the operator’s discretion.

Vices
The vice system has automatic positioning via the X-axis. This allows each vice assembly to be positioned very easily, thus clamping the profile. Position indication and verification of correct vices positioning is handled by NC, displaying the information directly on the control screen.

Tilting table
CNC-controlled tilting table capable of rotation from – 90° to + 90° including intermediate angles. This solution allows machining on steel, aluminium and PVC profiles with maximum speed and precision, without resorting to manual rotation of the workpiece or the use of angle aggregates, taking advantage of the power of the electrospindle in all working conditions.

EMMEGI PHANTOMATIC T3 STAR CNC 4-AXIS VERTICAL PROFILE MACHING CENTER, NEW 2014, RIGHT ANGLE HEAD, 3 SIDED MACHINING, TOOL CHANGER