Doosan NHP 4000 HMC with DN Linear 12 Pallet System
CNC HMC Horizontal Machining Center
| Type of CNC Control | Fanuc 31i-B Control |
| Capacity: X-Axis Travel | 22.047 in (560 mm) |
| Capacity: Y-Axis Travel | 25.196 in (640 mm) |
| Capacity: Z-Axis Travel | 25.984 in (660 mm) |
| Capacity: Table Loading Area | (15.75 x 15.75 in) |
| Capacity: Maximum Part Diameter | 24.8 in (630 mm) |
| Capacity: Maximum Part Height (with no hydraulic interface) | 35.43 in (900 mm) |
| Indexing Table and Pallet Changer: Indexing | Full B-Axis |
| Indexing Table and Pallet Changer: Pallet Surface (Standard, no Center Bushing) | (24) M16 x 2.0 Tapped Base |
| Motion: X-Axis Rapid Traverse Rate | 2,362 ipm (60 m/min) |
| Motion: Y-Axis Rapid Traverse Rate | 2,362 ipm (60 m/min) |
| Motion: Z-Axis Rapid Traverse Rate | 2,362 ipm (60 m/min) |
| Spindle: Big Plus Spindle System | CAT 40 Big Plus |
| Spindle: Spindle Speed | 15,000 rpm |
| Spindle: Spindle Motor (S3 25%) | 25 / 49.6 hp (18.5 / 37 kW) |
| Spindle: Spindle Torque (S3 10%) | 223.6 ft-lbs (303 nm) |
| Automatic Tool Changer Specifications: Number of Tools | 175 |
| Utility: Power Required | 80 kVA / 210 amps @ 220v |
| Utility: Voltage Required – Fanuc | 2-5-235 Volts / 3 Phase |
| General: Machine Height | 105.9 in (2,690 mm) |
| General: Floor Space Required (L x W) | 195 x 90.55 in (4,950 x 2,300 mm) |
| General: Machine Weight | 21,384 lbs (8,700 kg) |
| DN Linear Pallet System | yes |
| Machine Specifications: Description | LSP 4000 for NHP 4000 |
| Machine Specifications: Pallet Dimension | 15.7 x 15.7 in (400 x 400 mm) |
| Machine Specifications: Workpiece Diameter | 24.8 / 23.6 in (630 / 600 mm) |
| Machine Specifications: Workpiece Weight | 881.8 lbs (440 kg) |
| Machine Specifications: Forking Type | Single Fork (Telescopic Mechanism) |
| Machine Specifications: Turntable Indexing | 45Ń |
| Machine Specifications: Power Supply (AGV) | Trolley Bar |
| Machine Specifications: (AGV<-> Main Control) | Optical |
| Machine Specifications: Number of Machines | Expandable 1 ~ 7 |
| Machine Specifications: Number of Setup Stations | 1 |
| Machine Specifications: Number of Pallet | 12 (6 x 6 Double Stack) |
Doosan NHP 4000 Horizontal Machining Center with DN Linear 12 Pallet System.
Comes with Probing, Tool Laser Measurment Chip Conveyor, Measurements
Comes with Probing, Tool Laser Measurment Chip Conveyor, Measurements
