← Back to Machine List

Doosan Lynx 200B – Year 1998

Turning length 322 mm
Turning Ø 297 mm
Ø above transversing slide 348 mm
Type of CNC
X-axis 160 mm
Z-axis 330 mm
Spindle taper A2-6
Spindle bore 62 mm
Number of turrets 1
Number of tools on turret 10
Turning speed 4000 rpm
Spindle motor power 7.5 kW
Tailstock yes
Bar feeder yes
Length x width x height 1625.0 × 1600.0 × 1550.0
Weight 3250 kg
Worked hours
Hours under power 14900 hours
State good

DOOSAN LYNX 200B – Two Axis Chucker
200mm 3 Jaw Hydraulic Chuck
Year of manufacture 1998

Max. cutting dia. 279mm
Swing over slide 348mm
Max. machining length 322mm

Spindle nose, A2-6
Spindle bore 62mm
Spindle motor 7.5kw
Spindle speeds, 40 – 4000 RPM

Turret 10 stations

X Axis Travel 160
Z Axis Travel 330
Rapid travers X/Y = 790/945 RPM

Equipment = FANUC 21i CNC Control.

Chip conveyer
Parts catcher
Turret tooling
Fume extractor
Work light
Tooleye
All Available Manuals
All Available Tooling

14900 Operation Hours

Machine footprint. L 1625mm x W 1600mm x H 1550mm
Weight 3250kg

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan? Used Machines For Sale
15/01/2026 • 3 min read

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan?

here’s insider manufacturing advice on what seasoned buyers consider before purchasing a used / second-hand / pre-owned / surplus Makino…

Read Guest Post →
How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan? Used Machines For Sale
14/01/2026 • 3 min read

How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan?

Here’s a professional, structured guide on how to avoid common pitfalls when buying a pre-owned, second-hand, surplus, or used Mazak…

Read Guest Post →
How Smart Engineers Assess a Pre-Owned, Used, Second-Hand, Surplus CNC-Takang VMC 1700S – Year 2011 made in Taiwan Before Purchase Used Machines For Sale
13/01/2026 • 4 min read

How Smart Engineers Assess a Pre-Owned, Used, Second-Hand, Surplus CNC-Takang VMC 1700S – Year 2011 made in Taiwan Before Purchase

Below is a professional, detailed guide for engineers and buyers on how to evaluate a pre-owned, used, second-hand, surplus CNC-Takang…

Read Guest Post →