← Back to Machine List

DOOSAN HP 5100-II – Year 2015

DOOSAN HP 5100-II 4 AXIS HORIZONTAL MACHINING CENTER – Year 2015

HORIZONTAL MACHINING CENTER
ONLY 6400 CUTTING HOURS!
Machine is equipped with Fanuc 31i-B Control
Chip Blaster JV40-0259
Nanocon Oil Chiller
Losma Darwin D2000 Mist Collector
LNS MF2 MicroFine Dual Chip Conveyor
HYDRAULIC CLAMPING
ROBOT INTERFACE
Auto Door Open and Close on Loading Station
CAPACITY
·
Pallet size……………………………………………….(2) 19.7” x 19.7”
(500mm)
Pallet Index………………………………………………0.001 Degree
Pallet Index/Shuttle Time ……………………………1.4 sec/7.5
Sec
Max Workpiece Weight………………………………….1,102.3lbs
Travels
X axis Table…………………………………………33.5”
Y axis Spindle Head travel…………………………27.6”
Z axis Column Travel……………………………….29.5”
Spindle Center to Pallet Top……………………….2.00”-29.5”
Spindle Nose to Table Center………………………5.9”-35.4”
Rapid Traverse Rate……………………………….2,362.2 IPM
Spindle
Spindle Taper………………………….………HSK 63
Spindle Speeds………………………………..14000rpm
Spindle Drive Motor…………………………..

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan? Used Machines For Sale
15/01/2026 • 3 min read

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan?

here’s insider manufacturing advice on what seasoned buyers consider before purchasing a used / second-hand / pre-owned / surplus Makino…

Read Guest Post →
How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan? Used Machines For Sale
14/01/2026 • 3 min read

How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan?

Here’s a professional, structured guide on how to avoid common pitfalls when buying a pre-owned, second-hand, surplus, or used Mazak…

Read Guest Post →
How Smart Engineers Assess a Pre-Owned, Used, Second-Hand, Surplus CNC-Takang VMC 1700S – Year 2011 made in Taiwan Before Purchase Used Machines For Sale
13/01/2026 • 4 min read

How Smart Engineers Assess a Pre-Owned, Used, Second-Hand, Surplus CNC-Takang VMC 1700S – Year 2011 made in Taiwan Before Purchase

Below is a professional, detailed guide for engineers and buyers on how to evaluate a pre-owned, used, second-hand, surplus CNC-Takang…

Read Guest Post →