DN SOLUTIONS DOOSAN DVF-5000 CNC 5-Axis Vertical Machining Center – Year 2022
| General Information | ||
|---|---|---|
| Manufacturer | DOOSAN | |
| Model | DVF-5000 | |
| Year | 2022 | |
| Machine Type | 5-Axis Machining Center | |
| Axis Travels | ||
| X-Axis Travel | 24.6″ | 625 mm |
| Y-Axis Travel | 17.7″ | 450 mm |
| Z-Axis Travel | 15.7″ | 400 mm |
| B-Axis Travel | +110° / -30° | |
| C-Axis Travel | 360° | |
| Table & Workpiece | ||
| Table Size | 19.68″ | 500 mm |
| Max Workpiece Diameter | 21.65″ | 550 mm |
| Max Workpiece Height | 17.71″ | 450 mm |
| Max Table Load | 882 lbs | 400 kg |
| Spindle Nose to Table | 5.9″ – 21.65″ | 150 – 550 mm |
| Spindle | ||
| Spindle Taper | CAT 40 / BIG PLUS | |
| Spindle Speed | 18,000 RPM | |
| Spindle Motor | 30 HP | 22 kW |
| Tooling | ||
| Tool Capacity | 120 Tools | |
| Tool Change Time (T-T / C-C) | 1.3 sec / 5.3 sec | |
| Performance | ||
| Rapid Traverse (X/Y/Z) | 1575 IPM (40 m/min) | |
| Max Cutting Feed Rate | 787 IPM (20 m/min) | |
| Electrical | ||
| Power Supply | 205–235V / 3 Phase / 170 Amp @ 220V | |
| Dimensions & Weight | ||
| Machine Height | 114″ | 2896 mm |
| Floor Space | 114″ x 87″ | 2896 x 2210 mm |
| Weight | 16,534 lbs | 7,500 kg |
| Hours | ||
| Power On | 4,967 hrs | |
| Run Time | 1,825 hrs | |
| Cut Time | 1,210 hrs | |
| Equipped With | ||
| Fanuc F31i-B5 Control with AICC II (600 Block Look Ahead) & 1GB Data Server | ||
| Simultaneous 5-Axis Machining with Absolute Rotary Encoders (B & C) and Glass Scales (X/Y/Z) | ||
| Spindle Chiller | ||
| LNS Turbo Super Fine Chip Conveyor | ||
| Through Spindle Coolant (230 PSI) | ||
| Renishaw RMP600 Spindle Probe (CAT-40) | ||
| Renishaw Axiset Calibration Artifact | ||
| Renishaw Tool Setter Master (CAT-40) | ||
| Spindle Probe Calibration Ring (2″ ID) | ||
| Coolant Tank – 92 Gallons (348 Liters) | ||
| (7) 5th Axis Vises | ||
| 120 Tool Holders (Mostly Lyndex Brand) | ||
| Condition | ||
| Machine is under power and available for inspection at local shop | ||
