← Back to Machine List

Doosan DNM500 – Year 2012

Doosan DNM500 – Year 2012
DOOSAN VERTICAL MACHINING CENTER
MODEL: DNM-500, S/N: MV0010-001184, YEAR: 2012
4+1 AXES MACHINE & TRUNNION
SPECIFICATIONS:
X-AXIS TRAVEL………….. 40.2″ / 1020mm

Y-AXIS TRAVEL………….. 21.3″ / 540mm
Z-AXIS TRAVEL………….. 20.1″ / 510mm
TABLE SIZE…………….. 47.2″ X 21.3″ / 1200 X 540mm
MAXIMUM TABLE LOAD……… 1763 LBS / 800 kg
SPINDLE NOSE TO TABLE TOP.. 5.9″ – 26″
SPINDLE MOTOR………….. 20 HP
MAX SPINDLE SPEED………. 8,000 RPM
SPINDLE TAPER………….. CAT 40
AUTOMATIC TOOL CHANGER….. 30 TOOLS
RAPID TRAVERSE RATES X-Y/Z. 1417/1181 IPM
APPROXIMATE MACHINE DIMS… 90″ X 134″ X 106.5″
APPROXIMATE MACHINE WEIGHT. 14,500 LBS
EQUIPPED WITH:
FANUC Oi-MD
FOUR AXIS CNC CONTROL
AI APC LOOK AHEAD SOFTWARE
REMOTE JOG HANDLE
MPG
ATS ACCU-ROCK MODEL:
AX 140
CNC TRUNNION TABLE FULL FOURTH
PLUS TILTING INDEXING AXIS
COOLANT THRU SPINDLE
DUAL AUGERS
30 STATION SIDE MOUNT ATC
SPINDLE CHILLER
INSPECT UNDER POWER

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

Make the Right Move: Proven Steps to Evaluate a Used, Second-Hand, Surplus, Pre-Owned KAPP NILES KS 2003 Spline Shaft Grinding Machine made in Germany Used Machines For Sale
16/01/2026 • 3 min read

Make the Right Move: Proven Steps to Evaluate a Used, Second-Hand, Surplus, Pre-Owned KAPP NILES KS 2003 Spline Shaft Grinding Machine made in Germany

Below is a practical, step-by-step guide for evaluating a used / second-hand / surplus / pre-owned KAPP NILES KS 2003…

Read Guest Post →
Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan? Used Machines For Sale
15/01/2026 • 3 min read

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan?

here’s insider manufacturing advice on what seasoned buyers consider before purchasing a used / second-hand / pre-owned / surplus Makino…

Read Guest Post →
How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan? Used Machines For Sale
14/01/2026 • 3 min read

How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan?

Here’s a professional, structured guide on how to avoid common pitfalls when buying a pre-owned, second-hand, surplus, or used Mazak…

Read Guest Post →