← Back to Machine List

Doosan DNM 4500 – Year 2019

Doosan DNM 4500 – Year 2019
CNC Vertical Machining Center

Condition:used
Year:2019
Serial number:MV0090-0019

Machine control:Fanuc i Series Control
Table size:39.4″ x 17.7″
Maximum table load:1,320 lbs.
X-axis travel:31.5″
Y-axis travel:17.7″
Z-axis travel:20.1″
Spindle taper:CAT #40
Spindle speeds:12,000 RPM
Spindle motor:25 HP
Distance spindle nose to table top:5.9″ – 26″
Number of tool positions:30 Station Side Mounted ATC
Tool change time tool to tool:1.3 Seconds
Rapid traverse rates x, y / z:1417 IPM/ 1181 IPM
Cutting feedrates:590 IPM
Machine dimensions:117.5″ x 103″ x 85″
Machine weight:11,023 lbs.

30 Station Side Mounted Tool Changer
Wired for 4th Axis
Tsadakoma 4th Axis Rotary Table
Tool Probe
Coolant Through the Spindle
Chip Conveyor
Rigid Tapping
Remote Jog Handle
Spindle Orientation
Custom Macro B
Work Light
Coolant System with Tank & Pump
USB Port Interface
RS 232 Port Interface
Wired 220V/3/50-60 Hz Electrics
All Available Manuals
Some Tooling and Toolex Vise Included
ONLY 532 Run Hours of Use

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan? Used Machines For Sale
15/01/2026 • 3 min read

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan?

here’s insider manufacturing advice on what seasoned buyers consider before purchasing a used / second-hand / pre-owned / surplus Makino…

Read Guest Post →
How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan? Used Machines For Sale
14/01/2026 • 3 min read

How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan?

Here’s a professional, structured guide on how to avoid common pitfalls when buying a pre-owned, second-hand, surplus, or used Mazak…

Read Guest Post →
How Smart Engineers Assess a Pre-Owned, Used, Second-Hand, Surplus CNC-Takang VMC 1700S – Year 2011 made in Taiwan Before Purchase Used Machines For Sale
13/01/2026 • 4 min read

How Smart Engineers Assess a Pre-Owned, Used, Second-Hand, Surplus CNC-Takang VMC 1700S – Year 2011 made in Taiwan Before Purchase

Below is a professional, detailed guide for engineers and buyers on how to evaluate a pre-owned, used, second-hand, surplus CNC-Takang…

Read Guest Post →