DOOSAN DNM 4500 – Year 2016
CNC vertical machining center was produced in 2016.

– CNC control: FANUC 0iMF
– maximum feed, X axis: 800 mm
– maximum feed, Y axis: 450 mm
– maximum feed, Z axis: 510 mm
– rapid feed, X axis: 36 m / min.
– rapid traverse, Y axis: 36 m / min.
– rapid traverse, Z axis: 30 m / min.
– servo motor, X and Y axis: 1.8 kW
– servo motor, Z axis: 3.0 kW
– spindle-table distance: 150-660 mm
– table dimensions: 1000 x 450 mm
– table load capacity: 600 kg
– T-slots: 4-125 x 18H8
– spindle drive motor power (continuous / S3 15%): 11 / 18.5 kW
– spindle speed range: 80-8,000 rpm.
– maximum spindle torque S3 15%: 117 Nm
– spindle taper: ISO # 40, 7/24
– tool magazine (ATC): 30 tools, type CAM (it is designed to increase the reliability and durability of the machine)
– method of changing tools: arm
– tool holders: BT40 or DIN 69871
– maximum tool diameter: fi 80 mm (125 mm in the case of free adjacent tool stations)
– maximum tool length: 300 mm
– maximum tool weight: 8 kg
– tool change time, tool tool: 1.2 s
– position change time, chip to chip: 3.2 s
– tank capacity: 260 l
– pump capacity: 0.4 kW; 0.17 MPa x 40 L / min.
– tank capacity (cartridge): 0.7 l
– pump capacity (60 Hz): 0.024 kW; 5 MPa x 7 mL / min.
– electrical control: 3Ph-AC 220 V / 60 Hz x 29.6 kVA
– compressed air: 0.54 MPa x 250 NL / min.
– center dimensions: 2158 x 2615 x 2985 mm
– weight: 5000 kg

machine equipment :
– Manual guide: graphic programming support
– stream cooling of the working space
– manual manipulator “fishing rod”
– cooling through the spindle: 20 bar
– oil separator
– preparation for the 4th axis
– tool monitoring
– CE certificate
– DTR
– technical and operational documentation.