DMMB SB-350Y CNC Lathe 4-Axes
CNC Turning Center
Condition : New
| DMMB Model | SB-350Y | |
| Max. swing diameter over the bed | mm | 420 |
| Max. swing diameter over the slide | mm | 200 |
| Max. length of the workpiece | mm | 350 |
| Spindle bore | mm | 55 |
| Max. diameter through the spindle | mm | 45 |
| Spindle nose | A2-5 | |
| Max. spindle speed | rpm | 4000 |
| Max. speed of driven tools | rpm | 2500 |
| Driven tools 4 + 4 on the tower | ER25 | |
| Spindle motor power | kW | 7,5 |
| Engine power X | kW | 1,8 |
| Engine power Z | kW | 1,8 |
| Engine power Y | kW | 1,3 |
| X axis travel | mm | 1000 |
| Z axis travel | mm | 400 |
| Y axis travel | mm | 210(±105) |
| X/Z/Y rapid traverse | m/min | 24/24/12 |
| Positioning accuracy | mm | ±0,005 |
| Repeatability | mm | ±0,01 |
| Slant bed | 35° | |
| Guideway type | LM | |
| Number of tools in the turret | No. | 8 |
| Tool shank size | mm | 20×20 |
| Diameter of the round boring holder | mm | 16 |
| Approximate dimensions (length x width x height) | mm | 2100x1450x1750 |
| Approximate weight | kg | 3000 |
| Warranty in months | 12 |
| Standard equipment of the machine: | Optional machine equipment: |
| Software GSK | Software: Fanuc 0i TF, Siemens 808D, Siemens 828D. |
| Hydraulic collet chuck | Hydraulic 3-jaw chuck |
| Electrical components of the Schneider brand | Various collet sizes |
| 8 – station turret | Bar feeder |
| Ergonomic control panel |
Tool setter Renishaw after consultation. |
| Automatic lubrication system | Parts catcher after consultation. |
| Driven tools 4 x 4, Y axis + C axis |
T-slot holders |
| Linear motion guideway Hiwin/PMI | Tool holders |
| Automatic cooling system | |
| Machine lighting | |
| 3 color signaling light | |
| Manual machine controller | |
| Tool box |
The DMMB SB-350Y series is mass produced using world-class quality control processes.
These facts contribute to the reputation of the DMMB SB-350Y lathe
in the market for excellent quality and reasonable price. We make a great machine at a great price and savings
we will pass it on to you.
■ Linear motions are protected by telescopic covers
from stainless steel – provide maximum
protection against chips and coolant and extend
lifetime of the machine.
■ Servomotors and drives on X/Z/Y axes.
■ Various control systems, chucks and racks for tools are available.
Highly configurable to suit your needs.
CNC lathes of the DMMB SB-350Y model range
