← Back to Machine List

DMG MORI SEIKI DMU 50 eco CNC 5-Axis Vertical Machining Center – Year 2011

DMG MORI SEIKI DMU 50 eco CNC 5-Axis Vertical Machining Center – Year 2011

DMU-50 ECO DMG MORI-SEIKi GILDEMEISTER “ECOLINE” 5-AXIS CNC

VERTICAL MACHINING CENTER

New 2011, Serial No 1536580119-A, Model DMU-50 ECO, Series Ecoline

EQUIPPED WITH:

Siemens Sinumerik “810D” 5-Axis CNC Control

24.7″ x 19.7″ Swiveling Rotary Table w/Digital Drives

16-Position Side-Mounted Tool Changer

8000 RPM Spindle Speed

Federal Pacific Transformer

Chip Conveyor

CATALOG SPECIFICATIONS:

Table Dimensions, L x W 24.8″ x 19.7″

Table Load Capacity 440 LBS

Longitudinal Travel (X-Axis) 19.7″

Cross Travel (Y-Axis) 17.7″

Vertical Travel (Z-Axis) 15.7″

Table Tilt Range (B-Axis) -5 to 110-DEGREES

Table Rotation (C-Axis) 360-DEGREES

Spindle Nose to Table 31″

Spindle Taper CAT 40

Spindle Speeds, Range 0 to 8000 RPM

Power Rapid Traverse, X, Y, Z-Axis’ 472 IPM

Spindle Motor, Horsepower Rating 17.5 HP

Weight Approximately 8800 LBS

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

Used CNC Slant Bed CNC Lathes For Sale Paid Guest Post
13/04/2026 • 2 min read

Used CNC Slant Bed CNC Lathes For Sale

Used CNC Slant Bed CNC Lathes For Sale Category CNC Type Slant Bed CNC Lathes # Machine Description 1 Mazak…

Read Guest Post →
Avoid Costly Mistakes: Professional Tips for Purchasing a Pre-Owned, Surplus, Second-Hand, Used HARDINGE-BRIDGEPORT V-1000 CNC Vertical Machining Center made in USA Used Machines For Sale
12/04/2026 • 3 min read

Avoid Costly Mistakes: Professional Tips for Purchasing a Pre-Owned, Surplus, Second-Hand, Used HARDINGE-BRIDGEPORT V-1000 CNC Vertical Machining Center made in USA

Professional Buyer Guide – Avoid Costly Mistakes Machine Overview & Technical Specifications The Hardinge Bridgeport V-1000 is a high-performance vertical…

Read Guest Post →
What Should I Pay Attention To When Buying a Second-Hand, Pre-Owned, Surplus, Used Anayak Anak Matic-7 CNC Vertical Machining made in Spain? Used Machines For Sale
08/04/2026 • 3 min read

What Should I Pay Attention To When Buying a Second-Hand, Pre-Owned, Surplus, Used Anayak Anak Matic-7 CNC Vertical Machining made in Spain?

When evaluating a second-hand Anayak Anak Matic-7 CNC Vertical Machining Center (Spain), you should approach the purchase from both a…

Read Guest Post →