DMG Mori NLX 2500 SY 700 – Year 2019
CNC Turning Center
Machine description/type: CNC Turning and Milling Center
Manufacturer: DMG MORI
Model: NLX 2500 SY | 700
Year of production: 2019
Condition: used (only used for prototype purposes)
Specification:
Control: MITSUBISHI M730UM with CELOS (MAPPS V overlay)
Main spindle motor: 18.5/18.5/15 kW, torque: 599/505/409 Nm, 4000 rpm, KITAGAWA 10-inch BB210A821 chuck
Sub-spindle motor: 11/7.5 kW, torque: 77.8/53.1 Nm, 6000 rpm, KITAGAWA 6-inch B206A521F chuck
Machine working time: 6697 h
Program working time: 1488 h
Dual chuck switch (pedals) for main and sub-spindles,
Turning: Y-axis, 12 positions, indexing for up to 80 tools
Tool spindle: 10,000 rpm, 5.5/4.9/4.2 kW, torque: 40.5/36/16 Nm,
Capability to use the sub-spindle as a C-axis.
Coolant: 360-liter tank, 0.55 kW coolant pump
Chip conveyor.
Manual tool measurement on the machine.
Variable feedrate cycle (G950)
Technical data:
– Max. turning diameter: 366 mm
– Max. turning length: 705 mm
– Max. hole diameter through main spindle: 80 mm
– X-axis: 260 mm, speed: 30000 mm/min
– Z-axis: 795 mm, speed: 30000 mm/min
– Y-axis: +/- 50 mm, speed: 10000 mm/min
– B-axis (sub-spindle): 734 mm, speed: 30000 mm/min
– Indexing, increment, and accuracy of axes: 0.001 mm/degree.
– Max. spindle speed 1: 4000 rpm
– Max. spindle speed 2: 6000 rpm
– Max. tool spindle speed: 10000 rpm
– Number of tool stations: 12, BMT60 socket
– Height of tool square shank: 25 mm
– Tool turret indexing time: 0.27 s
– Machine height: 2200 mm
– Width x depth: 3981 x 2106 mm
– Machine weight: 6360 kg
– Controlled axes: X, Y, Z, C1, C2, B
Tool holders:
– WTO 413002000-60 drilling/milling OD on 20ER 6000 rpm – 2 sets
– WTO 413502001-60 drilling/milling ID on 20ER 6000 rpm – 3 sets
– ALGRA RRPPH 40 121UNL M65094 drilling/milling ID on 40ER 10000 rpm – 2 sets
– ALGRA RAPPH 40 121UNL M65025 drilling/milling OD on 40ER 10000 rpm – 2 sets
– WTO 420132018-60 drilling/milling OD on 32ER 10000 rpm – 1 set
– WTO 48-71875 ID holder, triple round shank, double-sided, internal and external coolant supply – 1 set
– SAUTER 151979 double-sided, 4x 25×25 square turning shank – 1 set
– WTO 48-85932 ID turning holder, triple, double-sided, indexed in X and Y axes – 1 set
– T00197 Parting-off holder 25×25 – 1 set
– T00184 Turning holder, 2 double-sided tools, square shank 25×25 – 1 set
– T00186 OD turning holder, single tool, square shank 25×25 – 1 set
– T10096 ID turning holder for shanks, D40 and D32 mm – 1 set
– T10097 ID turning holder for D40 mm shank – 3 sets
