DMG MORI NLX 2500 SY/700 CNC Turning Milling Center – Year 2017
| General Information | ||
|---|---|---|
| Manufacturer | DMG MORI | |
| Model | NLX 2500 SY / 700 | |
| Machine Number | NL2561708843 | |
| Year | 2017 | |
| Condition | Good (Used) | |
| Functionality | Fully Functional | |
| CNC Control | Mitsubishi M730UM (CELOS – ERGOline Touch) | |
| Working Capacity | ||
| X-Axis Travel | 260 mm | 10.24″ |
| Y-Axis Travel | ±50 mm | ±1.97″ |
| Z-Axis Travel | 795 mm | 31.30″ |
| Max Turning Length | 705 mm | 27.76″ |
| Max Turning Diameter | Ø 366 mm | Ø 14.41″ |
| Swing Over Bed | Ø 920 mm | Ø 36.22″ |
| Swing Over Cross Slide | Ø 740 mm | Ø 29.13″ |
| Bar Capacity | 80 mm | 3.15″ |
| Tooling System | ||
| Tool Stations | 20 | |
| Tool Holder | BMT40 | |
| Driven Tool Speed | 10,000 RPM | |
| Driven Tool Power | 5.5 / 4.9 / 4.2 kW | 7.4 / 6.6 / 5.6 HP |
| Rapid Traverse | 30 m/min | 1,181 IPM |
| Main Spindle | ||
| Max Speed | 4,000 RPM | |
| Spindle Power | 18.5 / 18.5 / 15 kW | 24.8 / 24.8 / 20 HP |
| Max Torque | 49 Nm | 36.1 ft-lb |
| Sub-Spindle | ||
| Max Speed | 5,000 RPM | |
| Spindle Power | 11 / 7.5 kW | 14.7 / 10 HP |
| Max Torque | 22 Nm | 16.2 ft-lb |
| Sub-Spindle Travel | 734 mm | 28.90″ |
| Cooling System | ||
| Tank Capacity | 366 L | 96.7 gal |
| Machine Hours | ||
| Power On Hours | 19,393 hrs | |
| Cutting Time | 8,800 hrs | |
| Electrical | ||
| Power Requirement | 48 kVA | |
| Dimensions & Weight | ||
| Length | 5330 mm | 209.84″ |
| Width | 4100 mm | 161.42″ |
| Height | 2395 mm | 94.29″ |
| Weight | 8360 kg | 18,430 lbs |
| Equipment | ||
| Chip Conveyor | ||
| Signal Tower | ||
| Note | ||
| The depicted tools, driven tools, and both chucks are not included in the scope of delivery. | ||
