DMG MORI ECOMILL 800 V – Year 2017
The machining center was taken as zero. Casting body is the same as CMX model in 2020. It is kept in a covered area.
Necessary maintenance was done by the service. As it can be understood from the working hours, he did not work hard.
It worked with aluminum weight.
Technical features are as follows.
Working area
Movement on X / Y / Z axes mm 800/560/510
Distance from table to spindle nose mm 120 – 630
Burst X / Y / Z m / min 30/30/30
Maximum feed power X / Y / Z (40% DC) kN 5/5/51)
Cutting speed X / Y / Z m / min 24/24/24
Spindle
Maximum speed 12,000 rpm
Drive power (40% DC / 100% DC) kW 13/9
Maximum torque (40% DC / 100% DC) Nm 83/57
Drive power (25% DC / 100% DC) kW 16/9
Maximum torque (25% DC / 100% DC) Nm 105/57
Tool magazine / changer
Number of teams 30
Tool holder type SK 401)
Maximum tool weight kg 8
Maximum tool length mm 300
Maximum tool diameter mm ø 80
Maximum tool diameter mm ø 125 for adjacent empty stations
Table configuration
Workpiece mounting surface with T-nuts mm 1.100 × 560
Loading height (top table edge) mm 850
Table load (total weight) kg 800
Positioning accuracy μm 6
Linear guide rails
Dimensions in X / Y / Z mm 35/35/35
Ball screws
Ball screws X- / Y- / Z-axis (D × P) mm ø 40 × 12 / ø 40 × 12 /
Control
DMG MORI SLIMline® multi-touch control
(19 “/ Operate on SIEMENS control)
