DMG MORI ecoMill 70 – Year 2016
| X axis | 750 mm |
| Y axis | 600 mm |
| Z axis | 525 mm |
| Table length | 800 mm |
| Table width | 620 mm |
| Max load on table | 350 kg |
| Spindle taper | SK-40 |
| Max. spindle speed | 12000 rpm |
| Spindle motor power | 13 kW |
| Overhauled | no |
| CNC 5 Axes Machining Center | |
| Worked hours | 6731 hours |
| Hours under power | 19494 hours |
| State | good |
CNC controller: HEIDENHAIN TNC620
Axes
X-axis travel mm: 750
Y-axis travel mm: 600
Z-axis travel mm: 520
C-axis degrees: 360º
B-axis degrees: -10º +95º
Rapid traverse m/min: 24
Worktable
Table dimensions mm: 800×620
Max. workpiece weight kg: 350
Spindle
Spindle speed rpm: 12.000
Spindle drive power kW: 13
Spindle torque Nm: 83
Cooling
Cooling through the Spindle Center: 20
Tank capacity: 600
Tool system
Tool holder: SK-40
Tool magazine slots: 32
Equipment
Electronic Handwheel
Chip conveyor
Infrared probe
Rotating inspection windows
High pressure pump
Mist collector
3D quickSET
Workarea light
Direct measuring system XYZ
Air blast / coolant switch-over
Machine running times
Under power: 19.494
Spindle Working: 6.731
Rated power kVA: 35
