Year 2010
Used DMF 260 Milling machine, mobile floor type
New DMG Design X = 2600 mm, Y = 700 mm, Z = 700 mm
Fast 40 m/min, Acceleration 4 m/s² Speed range 20 bis 8.000 U/min
Vertical electrospindle with 23.5/13.5 Kw (25/100%ED)
Tool housing SK40 according to DIN 69871 Tool clamping according to DIN 69872
Warehouse 30 tool places (chain with double arm)
Chip-to-chip time 7.6 s Fixed table 2900 x 700 mm
Closed cabin, coolant container Direct measuring system
Continuous 3D control Heidenhain iTNC 530 Usage surface smarT.NC
ERGOline® Control, 19″ screen
B-axis milling head, 20 – 18.000 U/min, SK40 For tool housing according to DIN69871
Power 35/25 kW (40/100%ED)
Mountable/dismountable work area bulkhead (possible with integrated rotary table)
Air blow through the spindle Switchable through M-function, Compressed air
spindle 18,000 1/min: 1 drop of oil every 8 minutes
Tool magazine 60 places SK40 Chain magazine with double arm
Rotary table Lehmann EA520 drill bit height 180 mm
Pneumatic tailstock for EA520 drill bit height 180 mm
Infrared Touch Probe TS649
3D quickSET for Heidenhain Toolkit for checking and correcting kinematics precision
5-axis machine configuration (only in combination with measuring probe)
Signal lamp 4 colours red: general error yellow: reset required
green: Machine in automatic operation blue: machine in tooling phase
