← Back to Machine List

DMG Mori DMC 1035V Ecoline – Year 2013

DMG Mori DMC 1035V Ecoline – Year 2013

Manufacturer DMG Mori
Model DMC 1035V Ecoline
Year 2013
Condition Used
Control Mitsubishi M730BM with MAPPS
Table Size 47.2″ x 22″
Maximum Table Load 2,204 lbs.
X-Axis Travel 40.7″
Y-Axis Travel 22″
Z-Axis Travel 22″
Spindle Taper CAT #40
Spindle Speeds 12,000 RPM
Spindle Motor 13 HP
Number of Tool Positions 30 Station Tool Changer – Side Mounted
Maximum Tool Diameter / Length 5.12″ / 11.81″
Rapid Traverse Rates X, Y / Z 1181 IPM / 1181 IPM
Machine Dimensions 109″ x 98″ x 110″
Machine Weight 9,240 lbs.

30 Station Side Mounted Tool Changer

Chip Conveyor

Rigid Tapping

Coolant Tank with (2) Coolant PumpsUSB Port InterfaceRS-232 Port Interface

Wired 220V Electrics

Power On Hours – 17,366

Operation Hours – 2,378Cutting Hours – 1,688

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

Make the Right Move: Proven Steps to Evaluate a Used, Second-Hand, Surplus, Pre-Owned KAPP NILES KS 2003 Spline Shaft Grinding Machine made in Germany Used Machines For Sale
16/01/2026 • 3 min read

Make the Right Move: Proven Steps to Evaluate a Used, Second-Hand, Surplus, Pre-Owned KAPP NILES KS 2003 Spline Shaft Grinding Machine made in Germany

Below is a practical, step-by-step guide for evaluating a used / second-hand / surplus / pre-owned KAPP NILES KS 2003…

Read Guest Post →
Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan? Used Machines For Sale
15/01/2026 • 3 min read

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan?

here’s insider manufacturing advice on what seasoned buyers consider before purchasing a used / second-hand / pre-owned / surplus Makino…

Read Guest Post →
How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan? Used Machines For Sale
14/01/2026 • 3 min read

How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan?

Here’s a professional, structured guide on how to avoid common pitfalls when buying a pre-owned, second-hand, surplus, or used Mazak…

Read Guest Post →