DMG Mori CLX 450 – Year 2019
| Turning Ø | 400 mm |
|---|---|
| Ø above the bed | 650 mm |
| Type of CNC | DMG Mori SLIMline + Siemens |
| X-axis | 267.5 mm |
| Z-axis | 600 mm |
| Spindle taper | A2-8 |
| Spindle bore | 80 mm |
| Number of turrets | 12 |
| Turning speed | 4000 rpm |
| Tailstock | yes |
| Bar feeder | no |
| DMG Mori CLX 450 | |
| Length x width x height | 2988.0 × 2953.0 × 2122.0 |
| Weight | 5400 kg |
| Worked hours | 2037 hours |
| Hours under power | 5046 hours |
| State | good |
DMG MORI CLX450 Lathe machine was manufactured in Poland in the year 2019 This machine counts with only 5046 working hours of which 2037 are spindle hours. It is equipped with a DMG MORI SLIMline and SIEMENS control unit. This machine can perform with a spindle speed up to 4000 rpm.
Manufacturer: DMG Mori
Model: CLX 450
Year of manufacture: 2019
Working hours: 5046 h
Spindle hours: 2037 h
Technical Information
Control unit: DMG Mori SLIMline + Siemens
Dimensions
length: 2988 mm
width: 2953 mm
height: 2122 mm
Machine weight: 5400 kg
Spindle speed range: 4000 rpm
X-axis movement: 267,5 mm
Z-axis movement: 600 mm
X-axis rapid traverse: 30/30 m/min
Z-axis rapid traverse: 30/30 m/min
Number of turrets: 12
Main electronic connection: 400v / 50hz
Power consumption: 39 kVA
Diameter over bed: 650 mm
Max turning diameter: 400 mm
Spindle nose: A2-8
Bar capacity diameter: 80 mm
Bar lenght max: 200 mm
Bar weight max: 4 kg
Tailstock travel: 500 mm
Chip conveyor
Turret sauter V3 (delta)
Spray gun
Measuring device
4x signal lamp
High-pressure pump
Linear scale X
Turret’s all tools driven
Full documentation available
