DMG DECKEL MAHO DMU 70V – Year 1999
| Axis X | 710 mm |
| Axis Y | 520 mm |
| Axis Z | 520 mm |
| CNC | Heidenhain MillPlus |
| Table length | 700 mm |
| Table width | 500 mm |
| Max. part weight | 350 kg |
| Number of tool pockets | 60 |
| Spindle taper | SK40 |
| Max. spindle speed | 12000 rpm |
| DMG DECKEL MAHO DMU 70V | |
| Length x width x height | 2700.0 × 3000.0 × 2700.0 |
| Weight | 7000 kg |
| Worked hours | 27878 hours |
| Hours under power | 61205 hours |
| State | good |
DMG DECKEL-MAHO type DMU 70V
Machining center – universal CNC 5 axes with CNC control from Heidenhain MillPlus
Year of construction 1999
Make Heidenhain MillPlus
5-axis machine with B + C – axis NC swivel rotary table
Traverse paths X710/Y520/Z520
Total power requirement 32 kVA
Tool holder spindle taper SK40
Max. spindle speed up to 12000 rpm
Feed X, Y, Z up to 10,000 mm/min
Rapid traverse X, Y, Z 30 m/min
Tool magazine: 60 places (2x 30 places)
NC rotary table diameter 700mm x 500mm, 9 slots 14mm, 63mm distance
Table load 350 KG
Dimensions and weight:
Depth 2.7 meters width 3 meters height 2.7 meters
Weight about 7000 kg
Machine documents
electronic handwheel
Coolant device
elapsed operating hours Machine ON: 61205 Spindle Run: 27878
To the machine :
A 5-axis machining center DMG DECKEL-MAHO type DMU 70V with CNC MillPlus path control from Heidenhain is offered.
The machine is in very good, well-kept condition.
The axes and speed spindle run very quietly.
Geometrically, the DMU is very good. Take the opportunity to inspect and try out the machine on site under power.
