| DIXI 60 Horizontal Optical JIG Borer Mill – Year 1966 | |
|---|---|
| TABLE | |
| Working Surface | 711 × 813 mm (28″ × 32″) |
| Number of T-Slots | 6 |
| RANGE | |
| Longitudinal Travel | 584 mm (23″) |
| Cross Travel | 559 mm (22″) |
| Rotary Motion of Table | 360° |
| Min. Distance Spindle Center to Table | 51 mm (2″) |
| Max. Distance Spindle Center to Table | 546 mm (21.5″) |
| Max. Table Load | 794 kg (1,750 lbs) |
| Max. Distance Between Spindle and Tailstock | 1,346 mm (53″) |
| Min. Distance Spindle Nose to Rotary Table Center | 381 mm (15″) |
| Max. Distance Spindle Nose to Rotary Table Center | 1,016 mm (40″) |
| SPINDLE | |
| Diameter of Boring Spindle | 60 mm (2.36″) |
| Diameter of Hollow Spindle Nose | 118 mm (4.66″) |
| Internal Taper | No. 40 |
| Spindle Travel | 610 mm (24″) |
| Vertical Travel of Spindle Head | 483 mm (19″) |
| Spindle Speeds | 34 – 1,400 RPM |
| High-Speed Attachment | 100 – 4,200 RPM |
| FEEDS | |
| Hydraulic Feed (Table & Spindle Head) | 0 – 1.98 mm/min (0 – 0.78″/min) |
| Spindle Feeds (Mechanical, 6 Steps) | 0.038 – 0.254 mm (0.0015″ – 0.010″) |
| Hydraulic Table Feed Equivalent | Infinitely Variable |
| DRIVE | |
| Spindle Drive | 4 HP (3 kW) |
| Hydraulic Pump Drive | 0.75 HP (0.56 kW) |
| CAPACITY | |
| Drilling Capacity (Cast Iron) | 50 mm (2″) |
| Drilling Capacity (Mild Steel) | 38 mm (1.5″) |
| Max. Milling Cutter Diameter | 152 mm (6″) |
| Boring & Facing Capacity (with Dixi Accessories) | 584 mm (23″) |
| DIMENSIONS & WEIGHT | |
| Base Dimensions | 2,870 × 1,270 mm (113″ × 50″) |
| Floor Space Required (L × W × H) | 3,835 × 1,854 × 2,108 mm (151″ × 73″ × 83″) |
| Machine Weight | 5,897 kg (13,000 lbs) |
| MANUFACTURER | |
| Company | ALINA CORPORATION |
| Address | 175 Sunnyside Boulevard, Plainview, Long Island, NY 11803, USA |
| Phone | |
| TWX | |
DESCRIPTION
Clamping of headstock
Signal lamp
Push button : All motions stop, except the optic
Push button : Spindle motor start
a) R.H. rotation = normal
b) L.H. rotation
Push button : Spindle motor stop
Automatic stop of spindle feed
Clamping of spindle feed
Push button : Hydraulic pump stop
Push button : Hydraulic pump start
Switch : Microscope lamp
Gear selector : slow-o-fast (range of spindle speed)
Speedometer
Control lever : vertical motion
Control lever : longitudinal motion
Switch : faster – slower of variator (spindle speed)
Control lever : cross motion
Control knob : speed of hydraulic motions
Start and brake of spindle
Selector for levers 14, 15 and 17
Microscope for longitudinal motion (accessory)
Fine adjustment longitudinal motion
Microscope cross motion
Clamping longitudinal motion
All motions stop, except the optic
Main switch (coupled with lamp 2)
Clamping of cross motion
Microscope for rotary table
Hole for transport
Transport of end support (longitudinal)
Clamping of end support (longitudinal)
Clamping of bearing in end support
Clamping of vertical motion of end support
Microscope of vertical motion of end support
Handwheel for vertical motion of end support
Handwheel for rotary table (fine)
Lever for fine adjustment — free rotation of the table
Handwheel for cross motion
(a and b) Clamping of the rotary table
Spindle nut for tool attachment
Handwheel for vertical motion of the headstock
Levers for automatic feeds of spindle
Handwheel for spindle traverse
Lever for automatic spindle feed : on – off
Lever for direction of spindle feed
Position clock for spindle traverse
Microscope for vertical motion of headstock
Chains for counter weights
Holes for clamping of counter weights during transport
