Deckel Maho DMU 80P – Year 1999
CNC machine data:
Deckel-Maho-Universal, DMU 80 P machining center
Travel:
X = 800mm
Y = 700mm
Z = 600mm
C = 360 °
A = 45 °
B = Horizontal / Vertical
Type: 1649
Year of construction: 1999
Spindle speed: 8000 1 / min
Programming language: TNC430 from Heidenhain
Electronic handwheel Heidenhain: 7295/60008 and dummy plug instead of remote control.
TLC software version: GR472.01R NC software version: 280476-29 Serial and LAN connection.
Spindle with internal cooling and tool magazine 30 compartments, tool taper SK50.
Operating hours 56145 and 27389. Manuals same as DMU60P. Table load 630Kg.
600 liter coolant tank. Coolant pressure 20-40bar. 5 water jets and 5 air jets. Chip conveyor and all hoses and cables complete. Air pressure regulator with filter.
Description:
The machine is in very good condition and can be tested under power.
The rotary and swivel table as well as the tool clamp were completely overhauled and received a replacement computer from Heidenhain LE426PB with a fast SSD hard drive. Exchange of Siemens Simodrive LT module interface 108A type: 6SN1123-1AA00-0LA1.
Replacement of spindle encoder. Zero must be adjusted once a day. Unfortunately the side window has a crack. Many tool holders converted to IK. Aluminum cover strips on the side New. Inside and outside including the spindle hood newly painted and new lettering received.
New switch-on button green. The control panel has received additional handles. Valve hoses partly new. Hydraulic pump soundproof. New LED tube. The tool holders and tools can be purchased with. VHB.
