DECKEL MAHO DMU 70 VL CNC Vertical Machining Center +
2 x NC rotary table with swivel axis – Year 2001
| Specification | Metric | Imperial |
|---|---|---|
| Manufacturer | DECKEL MAHO | |
| Model | DMU 70 VL | |
| Machine Number | 15025704014 | |
| Year of Construction | 2001 | |
| Condition | Good (Used) – Fully Functional | |
| CNC Control | HEIDENHAIN TNC 426 | |
| X-Axis Travel | 2,350 mm | 92.52″ |
| Y-Axis Travel | 520 mm | 20.47″ |
| Z-Axis Travel | 520 mm | 20.47″ |
| Rapid Traverse (X / Y / Z) | 40 / 30 / 30 m/min | 1,575 / 1,181 / 1,181 IPM |
| Feed Rate (X / Y / Z) | 10 m/min | 394 IPM |
| Nominal Power (Apparent) | 41 kVA | 41 kVA |
| Operating Voltage / Frequency | 400 V / 50 Hz | 400 V / 50 Hz |
| Rated Current | 80 A | 80 A |
| Spindle Speed (Max.) | 18,000 rpm | 18,000 rpm |
| Tool Holder | HSK 63 | |
| Max Tool Diameter | 40 mm | 1.57″ |
| Max Tool Length (from spindle nose) | 150 mm | 5.91″ |
| Input Increment (X/Y/Z) | 0.01 mm | 0.00039″ |
| Linear Encoder Resolution (X/Y/Z) | 0.001 mm | 0.000039″ |
| Position Tolerance (X/Y/Z) | 0.010 mm | 0.00039″ |
| Setup Mode (X/Y/Z) | 20 – 2000 mm/min | 0.79 – 78.74 IPM |
| Working Area Travel X-Axis | 2350 mm (without dividing wall) 2 x 710 mm (with dividing wall) |
92.52″ (without wall) 2 x 27.95″ (with wall) |
| Tool Changer | 2 x 32 Positions | |
| Total Machine Height | 2,800 mm | 110.24″ |
| Total Machine Length | 9,000 mm | 354.33″ |
| Total Machine Width | 3,200 mm | 125.98″ |
| Required Compressed Air | 5.5 – 8 bar | 80 – 116 psi |
| Work Tables | 2 x NC Rotary Tables 700 x 500 mm |
2 x NC Rotary Tables 27.56″ x 19.69″ |
| Swivel Range | 0 – 180° | 0 – 180° |
| Input / Display Increment (Rotary) | 0.001° | 0.001° |
| T-Slot Spacing | 63 mm | 2.48″ |
| Rotary Table Weight | Approx. 310 kg | Approx. 683 lbs |
| Equipment | Chip Conveyor Coolant System Documentation / Manual Infinitely Variable Spindle Speed All Tool Holders Visible in Photos Included |
|
| Note | Clamping systems on the fixture tables are not included in the scope of delivery. | |
