DEA GLOBAL S 07.05.05 CMM Measuring Unit – Year 2004
CMM Coordinate Measuring Machine
Technical data of the measuring machine DEA GLOBAL S 07.05.05
– measurement in the X/Y/Z axes: 700/500/500 mm
– maximum permissible length measurement error MPEe: ± 2.3 + 3L/1000 µm
– measurement speed: 300 mm/s
– indexed measuring head: RENISHAW PH10MQ
– scanning probe: RENISHAW SP25M
– scanning module: RENISHAW SM25-1
– metrological software: PC-DMIS 2019 R1
The CMM DEA GLOBAL S 07.05.05 measuring machine, built in 2004 in Italy, is used for quick and very accurate measurement of details with complex shapes. Component measurements are made using the contact or non-contact method, which are then presented as a set of point coordinates.
The DEA GLOBAL Status 07.05.05 coordinate measuring machine is equipped with an indexed RENISHAW PH10MQ measuring head with a RENISHAW SP25M scanning probe, allowing to achieve the highest quality of measurement in the X, Y, Z axes with feeds of 700 mm (X axis), 500 mm (Y axis) and 500 mm (Z axis). The CMM DEA GLOBAL S 07 05 05 machine is also equipped with the advanced PC-DMIS 2019 R1 software.
