| Turning length | 1020 mm |
|---|---|
| Turning Ø | 320 mm |
| Ø above the bed | 570 mm |
| Type of CNC | ANUC Series O-T |
| X-axis | 260 mm |
| Z-axis | 1050 mm |
| Spindle bore | 91 mm |
| Number of turrets | 10 |
| Turning speed | 2500 rpm |
| Spindle motor power | 45 kW |
| Tailstock | yes |
| Bar feeder | no |
| Length x width x height | 3175.0 × 2080.0 × 2015.0 |
| Weight | 5950 kg |
CNC DAEWOO PUMA 12 L okarka was produced in 1996. The machine is after renovation. Currently, the encoder and spindle belts were replaced and adjusted. The lathe is equipped with a chip conveyor from Mayfran GmbH.
CNC control: FANUC Series O-T
turning diameter over the bed: 570 mm
recommended turning diameter: 320 mm
turning length: 1020 mm
spindle chuck size (model): 305 mm (B12)
cylinder I.D. : fi 78 mm
cylinder model: F2078H
spindle bore: A2 # 8 91 mm
bearing diameter, front / rear: 140/120 mm
spindle speed: 12-2500 rpm
engine power, cd./30 min. : 18.5 / 22 kW
tailstock quill diameter: 110 mm
tailstock quill stroke: 100 mm
cone: # 5 MT NO.
bed angle: 60 degrees
travel distance, X / Y: 260/1050 mm
fast travel, X / Z: 12/16 m / min.
servo power, X / Z: 1.8 / 3.5 kW
ball screw diameter, X / Z: 40/50 mm
turret: 10 tools
tool size, turning / boring: 25/50 mm
max tool diameter: 320 mm
chip conveyor: Mayfran
connection power: 45 kW
machine weight: 5950 kg
dimensions (L x W x H): 3175 x 2080 x 2015 mm
encoder and spindle belts currently replaced and adjusted
