Daewoo Doosan Puma 2100SY – Year 2012
CNC Turning Center
Manufacturer: Doosan
Model: Puma 2100 SY
Year: 2012
Specifications:
Max Swing Over Bed 30.7″
Swing Over Front Door 26.8″
Max Swing Over Carriage 24.8″
Max Bar Capacity 2.6″
Max Work Piece Diameter 15.98″ (main)
Max Turning Length 20.47″
Distance between Main & Sub 33.46″
MAIN SPINDLE:
Spndle Nose ASA-A2-6
Draw Tube ID 2.68″
Spindle Bore Diameter 2.99″
Spindle Speed 5,000 RPM
Spindle Motor 30 HP
MAIN SPINDLE C-AXIS:
Minimum programmable angle (degrees) 0.001
Rapid traverse rate (RPM) 400
C-axis contouring torque 70 Ft/Lb
C-axis braking torque 663 Ft/Lb
C-axis repeatability +/- 0.006 deg.
C-axis positioning accuracy 0.0167 deg.
BED, SADDLE, & CROSS SLIDE:
X axis travel 10.2″
Z axis travel 23.2″
Angle of slant bed 30 Degrees
X & Z axis rapid traverse rate 1,181 IPM
TURRET:
Number of tools 12
Number of index positions 24
Tool holder type BMT 55P
Turning tool shank size 1″
Boring bar diameter, main spindle 1.5″
Boring bar diameter, sub spindle 1″
Tool selection Bi-directional
ROTATING TOOLS:
Rotating tool RPM 50 – 5,000 RPM
Rotating tool spindle motor 7.5 HP
Rotating tool collet type ER25
Milling collet capacity 1/8″ to 5/8″
Max. tool length facing sub-spindle 3.94″
Max. X-axis tool length with Y-axis 3.8″
Y-AXIS:
Y-axis travel 4.13″ (2.065″)
Y-axis rapid traverse rate 394 IMP
Y-axis repeatability 0.00012″
SUB-SPINDLES:
Sub Spindle Speed 6,000 RPM
B axis travel (sub-spindle) 23.2″
Sub-spindle guideway span 13.2″
Spindle motor 20 HP
Spindle nose A2#5
Spindle Bore 2.44″
Draw tube ID 1.97″
Rapid traverse rate 1,181 IMP
Minimum programmable angle 0.001 degree (full C axis)
Equipped With:
Fanuc 31i-T CNC Control
Chip Conveyor
8″ (3) Jaw Chuck (main)
6″ (3) Jaw Chuck (sub)
3J Collet Chucks
Parts Catcher & Conveyor
LNS Quick Load Servo 80 Barfeed
(11) Liners
Coolant System with Skimmer
Tool Eye
RS232
All Available Manuals
Catalog Specifications: No Mist Collector, No Quick Change Collets
GENERAL:
Floor space (Length X Width) 125″ x 74″
Machine height 85″
Height from floor to spindle center 43.7″
Net weight 13,000 lbs
Voltage required 205 – 235 volt / 3 phase
Power requirement: 49 KVA (129 amps at 220 volts)
