← Back to Machine List

Cincinnati Milacron HPC-800XT Magnum CNC Horizontal Machining Center with 7 Pallets – Year 2002

Cincinnati Milacron HPC-800XT Magnum – Year 2002
Machine: Horizontal Boring Mill
Manufacturer: Cincinnati
Year Model: 2002
Model Number: HPC-800 Magnum
Serial Number: KC00A02000001
Job Number: 5471

A2100 U5 UBT/URT Configuration Screens

Spindle Max RPM 20,000 (note in book – 06/09/2003)

Axis Rates: HPC 500/630AP

Machine holds 100 tools – maximum tool length 482.6 mm

Y-Axis Machining Limit – 41.3”

X-Axis Machining Limit – 51.2” / Travel Z-Axis – 44.3”

B-Axis – 360 Degree Rotation for Pallets

7-Pallet machine for fixtures

Max Part – 1300 mm (51.2”) diameter / 200 mm minimum / 1300 mm (45.3”) height

Spindle number 50 taper

Feed rates Range -0.039 – 709” per minute

Rapid Traverse Range on all axes – 709 (IPM)

Pneumatic Requirements – 55 SCFM @ 80 PSI

Hydraulic System – 36 Gallon

Coolant System – 400 Gallon

CNC Horizontal Machining Center with 7 Pallets
The machine has a total of 7 pallets , 100 tool capacity, liner ways.
The machine was purchased while still in production making premium parts

Want to see machine photos and full commercial details?

View Full Machine Details

Latest Guest Posts

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan? Used Machines For Sale
15/01/2026 • 3 min read

Insider Advice: What Successful Manufacturers Consider Before Buying a Used, Second-Hand, Pre-Owned, Surplus Makino D500 CNC 5 Axis Vertical Machining Center made in Japan?

here’s insider manufacturing advice on what seasoned buyers consider before purchasing a used / second-hand / pre-owned / surplus Makino…

Read Guest Post →
How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan? Used Machines For Sale
14/01/2026 • 3 min read

How to Avoid Common Pitfalls When Buying a Pre-Owned, Second-Hand, Surplus, Used Mazak QT NEXUS 200M CNC Lathe C-Axis made in Japan?

Here’s a professional, structured guide on how to avoid common pitfalls when buying a pre-owned, second-hand, surplus, or used Mazak…

Read Guest Post →
How Smart Engineers Assess a Pre-Owned, Used, Second-Hand, Surplus CNC-Takang VMC 1700S – Year 2011 made in Taiwan Before Purchase Used Machines For Sale
13/01/2026 • 4 min read

How Smart Engineers Assess a Pre-Owned, Used, Second-Hand, Surplus CNC-Takang VMC 1700S – Year 2011 made in Taiwan Before Purchase

Below is a professional, detailed guide for engineers and buyers on how to evaluate a pre-owned, used, second-hand, surplus CNC-Takang…

Read Guest Post →