Cincinnati ACW6
Straightening Machine
Max. thickness 4 mm
The line for longitudinal cutting of sheet CINCINNATI ACW 6 includes:
– decoiler for sheet metal
– winder for sheet metal
– brake
– longitudinal cutting unit
– circular knives for cutting sheet metal (thickness 5 mm, 10 mm, 12 mm, 20 mm, 25 mm, 30 mm)
– push spacers (width 10 mm, 12 mm, 20 mm, 25 mm, 30 mm)
Technical specification of the CINCINNATI ACW6 longitudinal cutting line
– minimum thickness of the cut sheet: 0.5 mm
– maximum thickness of the cut sheet: 4 mm
– minimum width of the cut sheet: 10-30 mm
– decoiler capacity: 25 t
– internal diameter of the sheet metal coil on the decoiler: 508-610 mm
– outer diameter of the sheet metal coil on the decoiler: 2000 mm
– winder capacity: 16 t
– internal diameter of the winder: 508 mm
– maximum outer diameter of the winder: 2000 mm
The CINCINNATI ACW6 sheet slitting line processes thin steel sheets with a maximum thickness of 4 mm, guaranteeing the highest quality of products while optimal use of raw material. Sheet metal coils put on a special decoiler are gradually unrolled towards the cutting rollers, with special circular knives with a thickness of 5 to 30 mm. The CINCINNATI coil slitting line then feeds the sheet between rollers for precise slitting with a minimum width of 10mm, which is wound onto coils ready for further processing.
