Chiron FZ 08K SM Magnum Hi-Speed Plus – Year 2007
CNC 5-Axis Machining Center

SPECIFICATIONS:
Travels:
– X-Axis (Column)…………17.71″
– Y-Axis (In-Out)…………10.62″
– Z-Axis(Vertical)…………11″
Maximum Bar Capacity……..1.25″ (32mm)
Drilling Capacity in 1060 Steel w/Carbide Drill…………0.63″
Tapping…………0.5″
Milling Capacity in 1060 Steel…………3.65 ci/min
Milling/Turning Tool Taper…………HSK A-40
Tool Diameter – Maximum…………1.9″ or 3.94″ if adjacent places are free
Tool Weight – Maximum…………1.5 Lbs
Tool Length – Maximum…………6.3″
Tool Change Time…………Approx. 0.6s
Chip-to-chip Time…………Approx. 2.2s
Milling Spindle Speed…………20 – 27,000 RPM
Spindle Bearing Diameter…………1.57″
Tool Clamping Force…………1012 lbf
Throat Distance – Spindle to Column…………7.8″ – 18.5″
Distance – Spindle Nose to Table Surface…………6.7″ – 17.7″
Thrust on X/Y-Axis…………450 lbf
Thrust on Z-AxisThrust on X/Y-Axis…………450 lbf 675 lbf
Accelerations:
– X-Axis…………23 ft/s²
– Y-Axis…………23 ft/s²
– Z-Axis…………33 ft/s²
Fixed Table Clamping Surface…………30.3″ – 11.4″
Table Load…………331 lbf
Machine Weight – Approximate…………5,292 Lbs
High Speed Plus Drive:
– Power – Maximum…………5 HP
– Torque – Maximum…………6 ft lb
– Rapid Traverse Rate – X/Y/Z Axes…………2953 ipm
– Speed X/Y/Z Axes – Maximum…………33/49.2/65.6 ft/s²
Approximate Shipping Weight…………7,055 Lbs.

EQUIPPED WITH:
Siemens Sinumerik CNC Controller
High Speed Plus Version , 30,000 RPM Spindle
Lathe Spindle (A-Axis) 8000 RPM, Water Cooled, Pneumatic Clamping
Swivel Head (B-Axis)
Table Left to Right (V-Axis) runs parallel to X-Axis
Swivel Vise (C-Axis) rotates to hold bar, then part-off. Has 360 deg. rotation.
40 Station (Chain Style) Automatic Tool Changer
High Pressure Coolant Pump
Renishaw Tool Touch Setter
Renishaw Spindle Probe
Burn Engineering Spindle Chiller Unit
Simplex Fire Suppression System
Miscellaneous HSK A-40 Tool Holders
Rego-Fix Manual Clamping Unit PGC 2506
Miscellaneous Tool Holders
Books, Manuals + Drawings