Baykal HGL 3106 – Year 2014
hydraulic shear
| Cutting length | 3060 mm |
| Max. thickness | 6 mm |
| Max cutting angle | 1.6 ° |
| Backgauge adjustment | 750 mm |
| Baykal HGL 3106 | |
| Length x width x height | 3860.0 × 2560.0 × 1560.0 |
| Weight | 5500 kg |
– maximum cutting length: 3060 mm
– maximum sheet thickness: 6 mm
– knife inclination angle: 1.6°
– maximum number of jumps: 20/min
– rear bumper stroke: 750 mm
– engine power: 11 kW
– oil tank capacity: 160 l
– hydraulic pressure: 200 bar
– power supply: 3x400V 50Hz
– dimensions (length x width x height): 3860 x 2560 x 1560 mm
– total weight of the HGL 3106 machine: 5500 kg
Equipment for the BAYKAL HGL 3106 guillotine
– NC driver
– inverter
– sheet clamps: 17 pcs.
– pedal for foot control
– light curtains
– upper and lower blade
– electro-pneumatic controlled bumper
– emergency stop button
– rear bumper position controller
– regulation of setting the gap between the knives depending on the thickness of the cut sheet
BAYKAL HGL 3106 guillotine shears, built in 2014 in Türkiye, are designed for precise cutting of metal sheets with a maximum length of 3060 mm and a thickness of 6 mm. Excellent cutting quality is ensured by the high-quality 1.6° top and bottom blades with a maximum of 20 strokes per minute.
The BAYKAL HGL 3106 x 6 guillotine is controlled by an operator panel with an NC controller located on the machine body, allowing, for example, to adjust the gap between the knives or change the position of the rear stopper. Guillotine shears include: pedal for foot control and light curtains protecting against undesirable entry into the working area of the machine. The total weight of the guillotine is 5500 kg.
