Anca FX7 Linear Tool & Cutter Grinder 8-Axis – Year 2021
# Axis 5
Swing 7.8″
Grinding Wheel Dia. 8″
Power 25.5 hp
Max RPM 10,000 RPM
Anca FX7 Linear Tool & Cutter Grinder (2021)
Number of Axes: 8-Axis
X AXIS TRAVEL:: 15.1”
Y AXIS TRAVEL:: 12.5”
Z AXIS TRAVEL:: 8.6”
C AXIS ROTATIONAL TRAVEL:: 230
WORKPIECE DIAMETER:: 7.8”
GRINDING SPINDLE:: 19 kW 25.4 HP
GRINDING SPINDLE RPM RANGE:: 0 to 10,000 RPM
GRINDING SPINDLE TAPER:: HSK40F
SPINDLE TYPE:: SINGLE ENDED INDUCTION
WHEEL PACKS:: 2 x 8” max.
TOOL LENGTH: (VARIABLE BY TOOL DESIGN): 8”
Cut Time in Minutes: 266275 Minutes (4438 Hours)
Electrical Capacity: 16 KVA
Equipped With
(2) Machines Available, 8-Axis, Fanuc Robot Loader, Tool Pallets, Misc. Tooling,
LOADER TYPE: FANUC
The Fanuc Robot Loader is a versatile automation solution that is located completely within the FX Linear machine. It provides automatic tool loading, enabling extended periods of unmanned operation, for maximized productivity.
Can be used to auto-load up to 6 wheel packs & their coolant manifolds • Operator access from front of machine
Does not increase machine footprint
One gripper set for the entire diameter range
Ideal for loading tools Ø2 – 20 mm (1/16” – 3⁄4”)
Tool length range 30 – 250 mm (11⁄4” – 10”)
Double gripper, tool change for load/unload
Loading time of 9 seconds
The pallet capacity ranges from 840 tools with Ø2 mm (1/8”) shank, 520 tools with Ø6 mm (1⁄4”) shank and 96 tools for Ø20 mm (3⁄4”) shan
LINEAR MOTOR DRIVE on X & Y AXES
LINEAR SCALES on X,Y, and Z AXES
ANCA PATENTED SOFTWARE FOR A,V,U,and W AXES
TOUCH SCREEN MONITOR
REMOTE HANDHELD PENDANT
CONFIGURED:
AUTOMATION : PALLET TOP PLATES
AUTOMATION : ROBO TEACH SOFTWARE
WORK HOLDING: PREMIERPLUS PCA W20 COLLET ADAPTER
WORK HOLDING: MISC. SCHAUBIN W20 COLLETS
TOOL SUPPORT: LONG STEADY BED
TOOL SUPPORT: AUTOMATIC POP UP STEADY
WHEEL ARBORS: (8) HSK40F WHEEL ARBORS
DRESSING: AUTOSTICK ONE STATION
MEASUREMENT: AUTO WHEEL QUALIFICATION
COOLANT SYSTEM SOLD SEPERATELY:
MACHINE WAS CONNECTED TO A SHARED EBBCO COOLANT SYSTEM MISC. COOLANT MANIFOLDS
SOFTWARE:
iBalance
AutoStick
ToolRoom-RN34
CIM3D (V9.0)-Full
Auto Commissioning
Complete Tool Runout Compensation
PYROGEN FIRE SUPPRESSION SYSTEM
MYST EXTRACTOR
WHEEL & coolant Setup Ring
Misc. Tooling for Tool Grinding – Split equally between the two FX7’s
RENISHAW PROBE SYSTEM
SOFTWARE:
– iBalance
– AutoStick
– ToolRoom-RN34
– CIM3D (V9.0)-Full
– Auto Commissioning
– Complete Tool Runout Compensation
