AMADA EUROPE 258 turret punching machine
It was built in 2003 and installed in 2004.

Technical parameters:
CNC control: FANUC 18i-PB
pressure: 20 tons
maximum allowable weight on the table: 100 kg
maximum sheet thickness on the ball table: 6 mm
maximum size of a punched sheet with an intercept: 1250 x 4000 mm
maximum punching format, without intercept and with 27 stations head: 1250 x 2000 (Y1300 T2XX: Y10: y1260 T3XX) (X-10 X2010)
number of axes controlled simultaneously: 3 axes (X, Y, C)
number of tool stations: 27 (including 3 rotary ones)
revolver speed: 25 rpm.
number of pneumatic clamps / grips: 2
number of strokes per minute, distance 25.4 mm, cylinder stroke 6.5 mm: X320, Y250 strokes / min.
step punching, distance 1 mm, cylinder stroke 6.5 mm: X920, Y920 strokes / min.
maximum tool diameter: 88.9 mm
rotary stations: 2×1 1/4 “; 1×2”

maximum sheet thickness for a rotary station: 3 mm
working chute: X = 600, Y = 400
stop time: 295 ms
slider: hydraulic
lower spool travel turning point: 4 programmable points
punching accuracy: + -0.1 mm
amount of oil: 160 L
light curtain (3 beams): standard in European countries
power consumption: 30 kVA
weight of the punching machine: 11,000 kg