AMADA EMZ-3510 NT
turret punching machine was manufactured in France in 2012.
Technical parameters:
currently worked time: 41 930 h
punching force: 30 t
maximum thickness of the processed material: 4.5 mm
maximum product weight: 150 kg
processing range: 2500 x 1270 mm
machining range with an interception: 5000 x 1270 mm
X axis speed: 100 m / min
Y axis speed: 80 m / min
speed of displacement of both axes (X, Y) simultaneously: 128 m / min
revolver speed: 30 / min
stroke frequency during punching: max. 1000 strokes / min
stroke rate for outer surface labeling: 1800 strokes / min
stroke rate at 25.4 mm hole spacing: 500 strokes / min
tool stations: 45 stations (including 4 rotary stations)
trapdoor in the table: 500 x 500 mm
max. punching tool diameter: 114.3 mm
tool change time: 1.5 sec.
energy consumption: max. 7 kW / h, on average approx. 4-5 kW / h
compressed air of the Air Jet Vakuum machine: 250 l / min
machine weight: 22,000 kg
Technical data of the station – AMADEX:
axis of rotation of angles: C axis
program input: absolute
direction of rotation: two-way (right / left)
number of rotating tools: 4 pieces
drive: AC servomotor
maximum diameter with 2 rotating tools: 31.7 mm, corresponds to a rectangle of 30 x 6 mm
maximum diameter with 2 rotating tools: 50.8 mm, corresponds to a rectangle of 50 x 10 mm
rotational speed: 60 / min
Classification of turret tools:
station A: max diameter 12.7 (24 pieces)
station B: maximum diameter (12 pieces)
C station: max diameter (2 pieces)
D station: max diameter (1 piece)
E station: max diameter (2 pieces)
rotation B: maximum diameter (2 pieces)
rotation C: max diameter (2 pieces)
Equipment:
FANUC AMNC – WINDOWS control
Z-type 3-track revolver
brush table
electric servo drive “TWIN DRIVE”
tool lubrication system, type AIR-BLOW
control of WILSON-WHEEL tools
VAKKUM suction system
actuator for removing tools type C, D, E
sheet waviness sensors
3 sheet metal clamps with stepless adjustment
CD ROM, USB, 3,5 ”floppy disk drive, RJ45
Toolkit
tool housings of individual stations
sets of cabinets and stands to facilitate the daily operation and changeover of the machine
tool sharpening machine AMADA TOGU from 2011
