CNCBUL Industrial Machinery Brokerage
Global Industrial Machine Brokerage & Investment Advisory
CNC-TAKANG TNC-30N / 30NL CNC Machine Specifications
Origin: Taiwan
Category: Lathe CNC 10 Inch
| MODEL | TNC-30N / 30NL |
| Capacity | |
| Swing over bed | Dia. 640 mm (25.2\") |
| Swing over saddle | Dia. 420 mm (16.9\") |
| Distance between center | 670 / 1150 mm (26.4\" / 45.3\") |
| Cutting diameter | Dia. 480 mm (18.9\") Direct |
| Hydraulic chuck | Dia. 254 mm (10\") |
| Bar capacity | Dia. 75 mm (3\") |
| Bed width | 480 mm (18.9\") |
| Bed slant angle | 45 degrees |
| Spindle | |
| Spindle nose | A2-8 |
| Spindle hole | Dia. 87 mm (3.4\") |
| Spindle taper | 1/20 |
| Spindle speed | 32 ~ 3200 R.P.M |
| Spindle motor | FANUC αilP 22 (11/15 kw) |
| Spindle dia. (OD) | Dia. 130 mm (5.1\") |
| Turret | |
| Turret type | Hydraulic turret / Servo turret |
| Tool station & size | 10 / 12 (OPT), 25 × 25 mm (1\" × 1\") |
| X travel | 255 mm (10\") |
| Z travel | 650 / 1150 mm (25.5\" / 45.2\") |
| Y travel | + 60mm (OPT) |
| Rapid traverse | X: 15 / 15 M/min Z: 18 M/min |
| ID tool diameter | Dia. 32 mm (1.3\") |
| Tailstock | |
| Tailstock travel | 550 / 1050 mm (21.6\" / 41.3\") |
| Quill travel | 100 mm (3.9\") |
| Quill diameter | Dia. 110 mm (4.3\") / OPT Dia. 160 mm (6.3\") |
| Quill taper | MT4 (OPT MT5) |
| Motor | |
| Servo motor (X) | 1.8 kw |
| Servo motor (Z) | 3.0 kw |
| Coolant pump | 0.37 kw |
| Hydraulic motor | 1.5 kw |
| Power requirement | 30 KVA |
| Miscellaneous | |
| X axis ball screw dia. | Dia. 32 mm (1.3\") |
| Z axis ball screw dia. | Dia. 40 mm (1.6\") |
| Packing size | 4000 / 4550 × 2090 × 2250 mm (157.5\" / 179.1\" × 82.3\" × 88.6\") |
| Gross weight | 5500 / 6500 kgs |
- Hydraulic hollow chuck and cylinder
- Hydraulic turret and tool holders (direct type disk only)
- Programmable hydraulic tailstock
- Coolant & hydraulic system
- Center sleeve set
- Chip conveyor
- Operation manual
- Bar feeder
- Parts catcher
- C Axis / spindle index with driving tool turret
- Tool presetter
- Extra tool holder
- Sub-spindle
- VDI Tool holders
- CE mark
