CNC-TAKANG TNC-20A / AL CNC Machine Specifications

Send Inquiry
TNC-20A / AL
“CNCBUL.com is redefining the future of industrial trade — transforming data and machine knowledge into global intelligence and trusted connections.” Invest in CNCBUL.com

Origin: Taiwan

Category: Lathe CNC 8 Inch

MODEL TNC-20A / AL
Capacity
Swing over bed Dia. 460 mm (18.1\")
Swing over saddle Dia. 280 mm (11\")
Distance between center 460 / 660 mm (18.1\" / 26\") 380 / 580 mm (15\" / 22.8\")
Cutting diameter Dia. 270 mm (10.6\") Direct / Dia. 220 mm (8.7\") VDI
Hydraulic chuck Dia. 210 mm (8\")
Bar capacity Dia. 52 mm (2\") / OPT Dia. 65 mm (2.6\")
Bed width 360 mm (14.2\")
Bed slant angle 30 degree
Spindle
Spindle nose A2-6
Spindle hole Dia. 62 mm (2.4\") / OPT Dia. 75 mm (3\")
Spindle taper —
Spindle speed 40 ~ 4000 R.P.M
Spindle motor FANUC βiIP 18 (9/11 kw)
Spindle dia. (OD) Dia. 100 mm (3.9\")
Turret
Turret type Hydraulic turret
Tool station & size 8, 25 × 25 mm (1\" × 1\")
X travel 150 mm (5.9\")
Z travel 400 / 640 mm (15.7\" / 25.2\") 320 / 560 mm (12.6\" / 20.5\")
Y travel + ~ 50mm (OPT)
Rapid traverse X: 15 M/min Z: 15 M/min
ID tool holder dia. Dia. 30 mm (1.3\")
Tailstock
Tailstock travel 240 / 480 mm (9.4\" / 18.9\")
Quill travel 80 mm (3.1\")
Quill diameter Dia. 70 mm (2.8\")
Quill taper MT4
Motor
Servo motor (X) 1.8 kw
Servo motor (Z) 1.8 kw
Coolant pump 0.37 kw
Hydraulic motor 1.5 kw
Power requirement 22 KVA
Miscellaneous
X axis ball screw dia. Dia. 36 mm (1.4\")
Packing size 3110 / 3350 × 2000 × 2050 mm (122.4\" / 131.9\" × 78.7\" × 80.7\")
Gross weight 4000 / 4600 kgs
STANDARD ACCESSORIES:
  1. Hydraulic hollow chuck and cylinder
  2. Hydraulic turret and tool holders (for direct type disk only)
  3. Hydraulic tailstock for TNC-20A Series
  4. Programmable hydraulic tailstock for TNC-30N Series
  5. Coolant system and hydraulic system
  6. Center sleeve, Dia. 8, 10, 12, 16, 20, 25, MT1 and MT2 (one of each)
  7. Center sleeve, Dia. 12, 16, 20, 25, 32, MT2 and MT3 (one of each) for TNC-30N Series
  8. Chip conveyor
  9. Operation manual
OPTIONS:
  1. Bar feeder
  2. Parts catcher
  3. C Axis / spindle index with driving tool turret
  4. Tool presetter
  5. Extra tool holder
  6. Sub-spindle
  7. VDI Tool holders
  8. CE mark
← Back to all CNC-TAKANG Machines

Other CNC-TAKANG Machine Models

DCM 2832 DCM 2832 FA60H FA60H VR33 × 2380 VR33 × 2380 LAN 40 LAN 40 FA55H FA55H DCM 4242 DCM 4242 TNC-15 TNC-15 DCM 2152 DCM 2152 LA 26 LA 26 TNC-30N × 1650 / 2150 / 2650 / 3150 TNC-30N × 1650 / 2150 / 2650 / 3150