Description
Mitsubishi FA10S – Year 2005
EDM Wire
Year | 2005 |
---|---|
Make | Mitsubishi |
Model | FA10S |
Mitsubishi FA10S | EDM Wire |
X-Axis Travel | 13.7″ |
---|---|
Y-Axis Travel | 9.8″ |
Z-Axis Travel | 8.6″ |
Control | 64-Bit Industrial PC CNC |
U/V Axis Travel | 1.25″/1.25″ |
Degree Taper Cutting | 15 @ 4″ |
Inside Tank Dimensions | 31.4″ x 23.6″ |
Power Requirement | 200-230/3/60 |
Wire Diameter | .012″ |
Submerged Cutting | Up to 8.6″ |
Filter Tank Capacity | 116 Gallons |
Table Dimensions | 23.2″ x 20.2″ |
Max Workpiece Dimensions | 31.4″ x 23.6″ x 8.4″ |
Machine Dimensions | 62″ x 65.6″ x 75.9″ |
Machine Weight | 6,000 Lbs |
FEATURES
16 Step Programmable Flushing Control | Auto Oiler |
Auto Power Recovery | Auto Wire Threading |
Chiller | Direct Drive 25mm Ball Screws |
Fast Fill Pump | Glass Scale Feedback |
Rotary Glass Encoders | 2 Millionths Resolution Encoder |
Servo Closed Loop Torque Control With Wire Tensioning System | 22 Lb Wire Spool |
4 Sided Table One Piece | Wire Chopper |
Submerged Threading & Insert At Break Point | Upper & Lower Power Feeds |
Vertical Movement Machining Tank Door | Automatic Level Control |
Digital AC Servo Drive System | Fine Hole Insert |
Fine Surface Machining | Linear Motion Guide Ways Support X/Y/Z Axes |