Description
| Type | Vertical |
|---|---|
| Module + | 30 |
| Module – | 20 |
| Motor power | 15 kW |
| Length x width x height | 8600.0 × 4440.0 × 3800.0 |
| Weight | 32000 kg |
Specifications:
Machine tools of model 5A342 are intended for milling of teeth of cylindrical gears by the method of rolling in with a worm mill and by the method of single division of a disk or finger mill.
The largest diameter of the machined spur gears, mm 2000
The greatest length of vertical movement of a milling support, mm 900
The largest module of the processed wheel (not less), mm:
– a worm mill 20
– a disk mill 25
– finger mill 30 *
The greatest angle of inclination of the tooth line of the gears being machined, degrees ± 45o
Diameter of a table, mm 1800
The greatest mass of the installed workpiece (taking into account the mass of the fixing elements), kg 20,000
The largest diameter of the installed worm cutters, mm 300
The greatest length of the installed worm mills, mm 500
Limits of the numbers of cut teeth 10 … 1800
Spindle speed limits, rpm 8 … 125
Axial feed limits, mm / min:
– when running in 0.02 … 510
The limits of radial feeds, mm / min 0,013 … 328
The greatest twisting moment on a spindle (not less), kN.m 2,5
Type of current supply network Alternating three-phase
Rated frequency, Hz 50 **
Rated voltage, V 380 **
Drive power of the main movement (not less), kW 20
Overall dimensions of the machine, mm:
length 8600
width 4440
height 3700
height above floor level 3800
Machine weight, kg 32040
