Description
| Max Dia. Gear | 863.6 mm |
| Type | Gleason 650 Hypoid Generator |
| Dimensions | 80″ W x 140″ L x 88.5″ H |
| Weight | 57200 Lbs |
The Gleason No 650 Hypoid Generator is a member of a new family of machines specially designed and built for cutting large spiral bevel, zerol bevel or hypoid pinions and mating gears up to 34” diameter of any ratio up to 10:1.
MAX. PITCH (COARSEST) 1.08 DP 23.5 MODULE
MAX. GEAR PITCH DIAMETER 34” 863.60 MM
MAX. FACE WIDTH 5” 127 MM
MAX. FULL DEPTH 1.750” 44.40 MM
EXTREME RATIO 10:1 RATIO 6:1 / 3:1 / 2:1 / 1:1
MAX. RADIAL SETTING: 15” 381 MM
MINIMUM PITCH ANGLE 5 DEGREES 42′
INDEX RANGE: 5 TO 120
WORK SPINDLE. #60 TAPER
DIAM OF TAPER HOLE LARGE 6″ 152.40 MM
TAPER P/FT WORK SPINDLE 3/4″ 19 MM
DEPTH OF TAPER 6″ 152.40 MM
DIAM HOLE T/WORK SPINDLE 5” 127 MM
MAX OFFSET ABOVE & BELOW 4-1/2″ 114.30 MM
DIST. MACHINE CTR SPINDLE MAX. 23-1/2″ 596.90 MM
CUTTER DIAMETERS: 9″,12″,16″,18″ 228,305,406,457 mm
CUTTER SPEEDS FROM: 12 TO 160 RPM STEP LESS
FEEDS: 7 SECONDS P/TOOTH MIN
FLOOR SPACE 80”x 140” x 88.5”
COPY OPERATING AND MAINTENANCE INSTRUCTIONS, SET OF CHANGE GEARS, HYDRAULIC WORK CLAMPING, DRAW ROD, DOUBLE ACTING HYDRAULIC CHUCKING CYLINDER, VARIABLE CUTTER SPEED, MODIFIED ROLL, CHIP CONVEYOR, COOLANT PUMP, LAMP, AUTOMATIC STOP, DOUBLE ACTING HYDRAULIC CHUCK, CHIP CONVEYOUR, CLEAN, RECENT PAINT, UNDER POWER FOR INSPECTION.
