Description
Technical specifications Unit JML5010B / JML5015B / JML5020B
Diameter over the counter mm 500
Diameter above the car mm 300
Diameter in the bridge gap mm 710
Desk width mm 405
Distance between tails mm 1000/1500/2000
Bridge channel length mm 240
Shaft end D1-8
Spindle bore diameter mm 80
Spindle taper MT7
Spindle speed level 24
Spindle speed range rev / min 9-1600
Linear and transverse advances 65
Linear feed rate mm / revolution 0.063-2.52
Transverse feed rate mm / revolution 0.027-1.07
Rapid linear feed mm / revolution 4.5
Rapid transverse feed mm / revolution 1.9
Maximum transverse support movement mm 320
Maximum cross support movement mm 145
Maximum car movement mm 950/1420/1900
Pencil case size mm 25×25
Metric pitch number 48
Metric pitch ratio mm 0.5-224
Number of inch pitch 46
Inch pitch ratio TPI. 72-1 / 8
Number of module pitch 42
Module pitch ratio mm 0.5-112
Number of diametric pitches 45
Diametric pitch ratio DP. 56-1 / 4
Tailstock pinol movement mm 150
Tailstock taper MT5
Main motor power kw 7,5
Cooler pump power W 0
Rapid feed motor power W 250
Dimensions LxWxH (JML-5020B) mm 3480x1280x1410
Net weight (JML-5020B) kg 2500
