06/10/2025 By CNCBUL UK EDITOR Off

Maximize ROI: Professional Tips for Purchasing a Pre-Owned, Used, Secondhand, Pre-Owned ACCUWAY VN 1155 CNC Vertical Machining Center made in Taiwan

Buying a used ACCUWAY VN 1155 CNC vertical machining center (or equivalent “VN-1155 / VN-1150 / VN series” model) can be a smart investment — if you approach it with technical rigor, risk awareness, and negotiation discipline. Below are professional tips aimed at maximizing your ROI (return on investment). Use them as a structured pre-purchase “due diligence playbook.”

I’ll break it into phases: Pre-screening, On-site evaluation, Testing & measurement, Risk mitigation & negotiation, and Post-purchase commissioning.


1. Pre-Screening — Before You Visit

These steps help you avoid wasted trips and identify red flags early.

a) Gather documentation, ask smart questions

Ask the seller to supply:

  • The machine’s nameplate (model, serial number, year of manufacture).
  • Maintenance logs / service history — when major overhauls, replacements, alignments happened.
  • Hours of operation / cycle count / cutting hours if available.
  • Original mechanical/electrical schematics, wiring diagrams, parts lists.
  • Control / CNC system model, version, backups of parameters / programs.
  • Any retrofits or modifications (e.g. changed spindle, new control, added coolant systems).
  • Photos (interior, spindle, axes, tool changer, wiring).
  • Reason for sale (upgrade, relocation, failure) and working environment (dusty, humid, etc.).

If the seller is reluctant or provides vague, inconsistent documents, treat that as a red flag.

b) Research benchmark specs & model details

Even though I could not locate specific published specs for “VN 1155,” ACCUWAY is a Taiwanese machining center manufacturer (lathe & machining center lines) known for vertical machining centers per their product catalog.
You should find similar VN / “VN series” machine specs in ACCUWAY’s catalogs or from other sellers, and note:

  • X / Y / Z axis travels
  • Table dimensions & load capacity
  • Spindle taper, maximum RPM, spindle motor power
  • Tool changer (type, capacity)
  • Rapid traverse speeds, feed drive performance
  • Control / CNC model (Fanuc, Mitsubishi, Siemens, etc.)
  • Machine weight, footprint

Comparing your candidate machine against expected specs will help you spot “underpowered” or “modified down” machines.


2. On-Site Evaluation & Visual / Structural Inspection

Once you’re at the machine location, carry out a rigorous walkaround before powering up anything.

Frame, Castings & Structure

  • Check the machine base and column for visible cracks, weld repairs, distortions, or signs of damage.
  • See if the machine has been shimmed repeatedly (which may hint at base shifting or settling).
  • Look under the machine and around coolant sumps for corrosion, rust, water damage, or coolant leaks.
  • Inspect covers, guards, doors — missing or bent panels are warning signs of carelessness or worse.

Way Covers, Guideways, and Slides

  • Where possible, uplift or partially remove way covers and check the metal surfaces. Look for scoring, pitting, or uneven wear.
  • Check for torn bellows, missing wipers, damaged scrapers. If the protective cover systems are compromised, the axes were likely exposed to chips / coolant damage.
  • Note if wear is asymmetric (heavier wear on one side) — that often signifies misalignment or side loads.

Spindle, Nose, and Front End

  • Examine the spindle nose, taper, drawbar area for nicks, corrosion, wear.
  • Look for oil or coolant leaks around spindle housing seals.
  • Inspect the spindle motor, coupling, belts (if any), and associated cooling assemblies.

Tool Changer / Magazine (if equipped)

  • Check the tool magazine, arms, grippers, indexing mechanism. Look for play, worn surfaces, misalignment.
  • Rotate the magazine (if possible) or visually inspect indexing stops, guide rails, sensors.
  • Check tool holder pockets for wear or damage.

Control Cabinet, Wiring & Electronics

  • Open the control / drive cabinet. Look for evidence of overheating: scorched wire insulation, discolored PCBs, melted connectors.
  • Check that wiring is neat, labeled, strain-relieved, and supported (not hanging loose).
  • Look for aftermarket wire splices, mismatched wiring, or modifications.
  • Inspect power supply modules, servo drive amplifiers, I/O cards for signs of damage, dust, or corrosion.

3. Motion, Testing & Precision Measurement

The visual inspection is just the start. The real test is how it behaves under motion and load.

Axis Movement & Repeatability Tests

  • Jog each axis (X, Y, Z) at moderate speeds. Observe for smooth motion, stutters, or binding.
  • Reverse the axis direction and check for backlash / “deadband” (i.e. how much movement before the axis responds).
  • Command the same coordinate repeatedly to test repeatability (e.g. go to position A multiple times and measure deviation).
  • Command small incremental moves in both directions and measure reversal error (hysteresis).

Spindle Run-Up & Runout Test

  • Power the spindle (if allowed), ramp from low rpm to rated rpm. Listen and feel for bearing noise, vibration, hum.
  • Use a test bar or dial indicator to measure radial and axial runout at the spindle nose or taper.
  • If the spindle has a coolant-through (TSC) or air-blast system, verify functionality.

Load / Cut Trial (if permitted)

  • Perform a light cutting test (e.g. facing or shallow pocket) using material representative of your jobs.
  • Measure resulting dimension, flatness, taper across workpiece.
  • Run repeated cuts to assess drift or deviation accumulation.
  • Monitor for noise, deflection, thermal effects or axis lag in corners or direction reversals.

Tool Change & Magazine Tests

  • Cycle through tool changes multiple times. Watch for hesitation, mis-indexing, or tool drop.
  • Use both heavy and lightweight tools to stress extremes.
  • Check whether magazine indexing and tool pickup/drop mechanisms remain precise.

Precision / Metrology Checks

Bring precision instruments (micrometers, dial indicators, gauge blocks) and validate:

  • Backlash and reversal error in all axes.
  • Repeatability of position commands.
  • Straightness and flatness over axis travel.
  • Spindle runout (internal and external).
  • Surface finish / geometry results from your test cut.
  • If your jobs require tight tolerances, check whether deviations are acceptable or require reconditioning.

4. Risk Assessment, Spares & Support Ecosystem

Even a mechanically sound machine can fail you if parts, support, or future maintenance are weak.

Parts & Consumables Availability

  • Check whether ACCUWAY (or Taiwan aftermarket) still supplies parts (bearings, ballscrews, tool changer modules, electronics).
  • Determine whether generic or third-party spares are usable.
  • Ask if the seller will supply or include spare consumables (seal kits, filters, cables, tool holders).

Electronics / Control Support

  • Confirm your candidate control (Fanuc, Siemens, Mitsubishi, etc.) is standard and still supported.
  • Check for availability of spare modules, card replacements, I/O boards, drives.
  • If the control is old / obsolete, evaluate how costly or viable a retrofit might be.

Long-Term Wear Risk

  • Estimate remaining life of critical wear parts: ball screws, linear guides, spindle bearings.
  • Factor in inspection / reconditioning costs (bearing replacement, regrinding ways, rechecking alignment).
  • Build a maintenance budget—these machines often require periodic realignment and wear-part replacement.

Machine Relocation & Reinstallation Hazards

  • Plan the disassembly, transport, reassembly and alignment carefully—poor handling can wreck guideways or spoil precision.
  • Label all cables, hoses, wiring, sensors before disassembly.
  • Prepare for leveling, calibration, alignment at your site.
  • Factor in rigging, foundation, leveling, calibration costs in your total offer.

5. Negotiation & Risk Buffer Strategy

To maximize ROI, build your bid logically — not emotionally.

  1. Create a defect / risk list from your inspection and test results.
  2. Obtain cost estimates for repairs, parts replacement, reconditioning, alignment, electronics fixes.
  3. Offer a price subtracting those remediation costs and a margin for hidden surprises.
  4. Demand a short acceptance period (e.g. 30–60 days) after installation to detect defects.
  5. Negotiate inclusion of spare parts, tooling, consumables with the machine.
  6. Factor in transport, rigging, calibration, reinstallation costs in your cost model.
  7. Leave a contingency buffer (10–20 %) for unforeseen issues.

6. Post-Purchase Commissioning & Best Practices

Once you’ve acquired the machine, follow a methodical commissioning plan to lock in performance.

  • Set up proper foundation, leveling and anchoring.
  • Flush and replace all fluids (coolants, lubrication, hydraulic if any).
  • Re-check all mechanical geometry: axis orthogonality, alignment, backlash.
  • Run break-in cycles under light loads, gradually ramping to full loads.
  • Measure baseline performance (runout, repeatability, accuracy) and log results.
  • Train operators on safe use, collision avoidance, and machine-specific quirks.
  • Establish a preventive maintenance schedule (routine checks on lubrication, backlash, spindle health, tool changer).
  • Monitor drift over time (e.g. weekly checks) and address deviations early.