Makina Teknik Detayları
REIDEN RX18 CNC 5-axis machining centre REIDEN RX18 CNC 5-Eksenli İşleme Merkezi Tezgah 5-axes in the basic version combined milling and turning Travel range from -15 ° to +105° Cutting area X axis mm 2'200 X axis with trigone milling head mm 1'800 Y axis mm 2'200 Z axis mm 1'610 C axis mm ø 1'800 Main drive Spindle speed min-1 8'000 Spindle power kW 93 / 102 (100 / 40% ED) Torque spindle max. Nm 445 / 557 (100 / 40% ED) Spindle speed min-1 15'000 Spindle power kW 63 / 73 (100 / 40% ED) Torque spindle max. Nm 300 / 348 (100 / 40% ED) Spindle speed min-1 20'000 Spindle power kW 150 / 187 (100 / 40% ED) Torque spindle max. Nm 95 / 102 (100 / 40% ED) DDT - Double Drive Technology Spindle speed min-1 3'000 Spindle power kW 105 / 125 (100 / 40% ED) Torque spindle max. Nm 884 / 1'202 (100 / 40% ED) Spindle speed min-1 8'000 Spindle power kW 63 / 75 (100 / 40% ED) Torque spindle max. Nm 200 / 275 (100 / 40% ED) Feed motor Rapid feed m/min 40 NC Rotary table Dimension mm ø 1'800 Max. rotary diameter mm 2'200 / 2'600* Miling head Automatic siweling head horizontal / vertical Standard Spindle taper HSK 100 / SK 50 Tool changer Tool changer,places 92 / 200* / 304* / 400* Max. tool length mm 600 Max. tool diameter mm 125 / 250 Control Heidenhain / Siemens TNC640 / 840D sl Pallet changer Dimension pallets mm ø 1'800 x 1'400 / ø 1'800 Max. load kg 5'000 / 4'000** / 8'000*** Machine specifications Machine weight kg 52'000 Dimensions length x width x height mm 8'550 x 7'301 x 4'766 * Optional ** for pallet changer *** at adjusted speed DDT Double Drive Technology Unique and patented As standard, the RX18 is delivered with a motor spindle version of 15,000 min-1 and a maximum torque of 348 Nm. An optional version with the double-drive concept DDT patented by Reiden Technik AG is available. With this version, a maximum torque of 1'202 Nm is reached via the high-torque motor at up to 3,000 min-1. Beyond 3,000 min-1, the high-torque motor is disengaged and a maximum number of revolutions of 8,000 min-1 is reached via the built-in motor spindle in the head. COMBINED MILLING AND LATHING With the spindle clamping and the optional rotary table, workpieces can be turned at a maximum speed of 250 min-1. The time-consuming exchanging of the workpiece between different machines is now a thing of the past. TRIGONAL MILLING HEAD - SIMPLY FUNKY AND INGENIOUS Due to the special arrangement of the A-axis, dihedral angles from -15° to +105° can be machined with only one axis. Milling with the trigonal head in the horizontal spindle position has the great advantage that X and Y-axes are continually loaded in the same direction. This reduces cross-stresses to a minimum. AUTOMATION DESIGN MATCHED TO THE MACHINE The PCS (pallet changing system) automation design is based on years of experience with our own product range. The solutions are compact and do not require an additional host computer. The interface with the machine is so designed that even an extension to a pallet system of well-known manufacturers is possible. PALLET BASE TABLE When changed, the pallet is pushed over bearing rollers with a gap of 0.5 mm on to the base table. The pallets are then clamped over 4 zero-point clamping systems. Repeat accuracy is +/- 0.001 mm. MODULAR DESIGN Due to its modular design, the machine can be extended from the standard pallet with 2 tables up to a linear storage unit. User-friendliness and machine handling are not affected in the process. 2-fold pallet changing system 4-fold pallet changing system Measures by our machine tools Even in developing a machine, we look for components and elaborate solutions that make it possible to keep the consumption of expensive resources such as electricity and air in daily use as low as possible. This not only helps to protect the environment, but also minimise the daily running expenses. The most important measures to increase energy efficiency are the following: Power regenerating drive systems Chip conveyors with interval function Coolant flushing with interval function Automatically deactivating suction system Automatic shut-down of auxiliary programs after the program cycle ends Leaktight valve technology Frequency-regulated coolant high-pressure pumps Weight-optimised moving masses Low-watt valve technology Patented spindle drive concept DDT Consumption-optimised pneumatic system High-quality servo axes Machine lighting with high-efficiency LED lights Use of high-quality components with high efficiency The use of polymer concrete as base material requires around 30% less primary energy than equivalent cast body. And even the CO2 share can be reduced by 66%. The disposal of polymer concrete, too, is uncomplicated, because as regular construction rubble it can be recycled for new filling materials or soil stabilisation. As a producer of machines with a single production location, a high level of own production and local supplies, we are able to reduce transports to a minimum. At the same time, our machines have a long service life, which adds to the overall positive balance.