CNCBUL Makina Detay Bilgisi - Makina Yatırım Portalı
 MAP PRO.X1000  Teklif AL


                CNC Dik İşleme Merkezi 5 Eksenli

Tezgah Durumu Yeni-SIFIR Satıcı Firma Adı Taner Perman
Tezgah Menşei
Satıcı Firma Adresi
Teklif AL
Tezgah Markası MAP Satıcı Firma Telefonu 0 533 748 30 91
Tezgah Modeli PRO.X1000 Satıcı E-posta Adresi
Makina Kategori                 CNC Dik İşleme Merkezi 5 Eksenli Tezgah Fiyatı $
Teklif AL
CNC Kontrol Ünitesi SIEMENS 840D
Tezgah Teslim Tarihi Hemen
Tezgah Üretim Yılı 2016 Makina Ağırlık Kg.
Teklif AL
Makina Gücü kW
Teklif AL
Makina Ölçüleri (LxWxH)
Teklif AL
Tezgah ilan No 475

Video Yükle - ÜCRETSİZ

   MAP  PRO.X1000

Makina Teknik Detayları

MAP PRO.X1000 CNC 5 Eksenli Dik İşleme Merkezi Tezgah MAP Werkzeugmaschinen PRO.X1000 CNC 5 Axis Vertical Machining Centre Technical data Workspace X-axis mm 800 Y-axis mm 1,015 Z-axis mm 800 Feed rate Max. feed rate m/min 120 Axis acceleration (X/Y/Z) m/s2 12 (Z: 20) Work spindle Rotation speed min-1 14,000 Spindle output kW 71 Tool holder HSK-A100 / HSK-A63 Tool magazine Capacity spaces 30 / 78 / 138 Chip to chip s 5 Work table 4-axes Mounting table mm on request Max. table load kg on request Work table 5-axes Mounting table mm ø 500 (800 x 800) Max. table load kg max. 500 Dimensions/weight Footprint (WxDxH) m 2.8 x 5.7 x 4.0 Weight kg 18,000 Control Siemens 840D sl Universal, dynamic and powerful A 5-axis machining centre with the perfect combination of dynamic, flexibility and performance. That’s the standard on which MAP Werkzeugmaschinen has developed the new PRO.X1000. The result is a highly productive vertical 5-axes machining centre that can efficiently realise almost any production task thanks to the combination of linear motor technology and a powerful tool spindle capable of a 5-side complete machining. Powered by Carbon Z-axis bridge As the first company to manufacture machining centres with linear motor drives MAP uses a Z-axis slide for the new PRO.X Series, which is made almost completely of carbon fibre reinforced plastic. The dynamics of the linear axes benefit from the approx. 45% in reduced weight of the Z axis. This results in a significant reduction of the machining times as it allows for higher cutting speeds with the same precisions. Moreover, the good vibration dampening of the carbon fibre reinforced plastic design guarantees an optimised surface quality as well as a longer service life of the tools. Advantages of carbon fibre reinforced plastic Carbon fibre reinforced plastic is used when a high weight-specific strength and stiffness are required, for example, in the aerospace or automobile and machine works industry. At the same weight, CFRP has 5 times the tensile strength of steel Thanks to the carbon fibre reinforced plastic the user can enjoy a number of critical advantages that will lead to long-term savings in time and costs: • Reduced machining times thanks to higher cutting speeds • Significantly lower non-productive times • Higher dimensional accuracy and surface quality • Improved operating life due to the good damping behaviour • Reduced power requirement due to the reduction of the moved masses • Reduced maintenance costs thanks to an excellent fatigue strength and corrosion resistance Linear motor drives Linear motor Quadrant transfer KGT / linear motor MAP sets new standards when it comes to speed and precision. The high-performance machining centre PRO.X1000 uses exclusively linear motors. In addition to an excellent performance, the linear motor drives that are almost free from play not only offer a low noise level but also a higher machine availability thanks to low wear and the freedom from maintenance. • 2 G maximum acceleration • 120 m/min maximum rapid feed speed and feed rates • 0.005 mm repeat accuracy of the axis positioning • High contour accuracy as there is no overdriving Heighest precision The extremely low thermal expansion of the carbon fibre reinforced plastic assembly group will prevent nearly any thermal growth during the operation and is an important aspect for the high dimensional accuracy of the machine. Thanks to the intelligent symmetrical design of the slide there will be no deformation of the Z- slide as a result of the different thermal expansion coefficients of add-on parts. Powerful tool spindle The highlight of the MPZ series is the powerful tool spindle boasting a drive power of 71 kW (40% ED), a maximum torque of 272 Nm (40% ED) and a rotation speed of 14,000 min-1. Optionally, the user can use the SK or HSK tool holder. • 272 Nm torque (S6-40% ED) • 71 kW drive power (S6-40% ED) • HSK-A63 or HSK-A100 tool holder Flexibility without compromises The fully integrated 30x tool magazine operates according to the pick-up principle and can be optionally expanded to up to 138 spaces without the need to increase the floor space. MAP offers three machine table options that allow for the appropriate specification of the workpiece mounting table. In addition to the 3 and 4 axes versions, a rotary table with an optional face plate or zero point clamping system will be available. • 3 tool magazines • 3 spindle types • 3 table designs • 3 table surfaces optionally with T-grooves, face plate or zero point clamping system

Makina Aksesuarları

Freze Spindle Koniklik
Freze X Eksen mm.
Freze Y Eksen mm
Freze Z Eksen mm
Freze W Eksen mm
Freze Çalışma Saati h
Spindle Çalışma Saati h
Freze Max.Devir rpm.
Freze Takım Kapasitesi
Freze Tabla Ölçüsü mm
Freze Palet Ölçüsü mm
Freze Talaş Konveyörü
Freze İçten Soğutma
Freze İlerleme Hızı mm/min
Freze Spindle Çapı mm
Freze Tork Nm
Freze Döner Tabla
Freze A Eksen mm
Freze C Eksen mm
Freze Takım Çapı mm
Freze Takım Uzunluk mm
Freze Takım Değiştirme Zamanı sn.
Freze Kolonlar arası Mesafe mm

Tornalama Uzunluğu
Tornalama Çapı mm
Torna Ayna Ölçüsü Inch
Torna Max.Devir rpm
Torna Çubuk Çapı mm
Torna Taret Sayısı
Torna Karşı Spindle
Torna Punta
Torna Canlı Takımlar
Torna Canlı Takımlar rpm
Torna Canlı Takımlar Güç kW
Torna Talaş Konveyörü
Torna Çubuk Sürücü
Torna Parça Yakalama
Torna Tilting Spindle
Torna Takım Değiştirme Süresi sn
Torna Takım Çapı mm
Torna Takım Uzunluk mm
Torna Takım Ağırlık Kg.
Torna Takım Tutucu Normu
Torna Spindle Nose
Torna Spindle Çapı mm
Torna Çalışma Saati h
Torna Takım Kapasitesi
Torna Frezeleme Tutucu Normu
Torna NC Döner Tabla
Torna Palet Sistemi
Torna Tork Nm

Taşlama Çapı mm
Taşlama Uzunluk mm
Taşlama İlerleme m/dak
Taşlama Gücü kW
Taşlama Devir rpm
Taşlama İşparçası Ağırlık Kg
Taşlama Min Modül
Taşlama Max Modül
Taşlama Profil Derinlik
Taşlama Taş/Wheel Çapı mm
Taşlama Taş/Wheel Genişlik mm

Geri Dön İş Parçanıza göre CNC Makina Yatırımı Yapın Satın Almak istiyorum

Buraya Reklam Vermek istiyorum   Satın AL

Kartvizitini Yayınla

Taner Perman

Tel : +90 533 748 30 91 / E-posta :